High Input 2A Step Down Converter 2A Output Current Up to 95% Efficiency 210kHz Switching Frequency ACT4065ASH

Brand Name:ACTIVE-SEMI
Certification:Original Factory Pack
Model Number:ACT4065ASH
Minimum Order Quantity:20pcs
Delivery Time:1 Day
Payment Terms:T/T, Western Union,PayPal
Contact Now

Add to Cart

Site Member
Location: Shenzhen Guangdong China
Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China
Supplier`s last login times: within 25 hours
Product Details Company Profile
Product Details

ACT4065A

High Input 2A Step Down Converter


GENERAL DESCRIPTION


The ACT4065A is a current-mode step-down DC/DC converter that generates up to 2A output current at 210kHz switching frequency. The ACT4065A is highly efficient with peak efficiency at 95% when in operation. Protection features include cycle-by-cycle current limit, thermal shutdown, and frequency foldback at short circuit. The ACT4065A is available in SOP-8 package and requires very few external devices for operation.


FEATURES

• 2A Output Current

• Up to 95% Efficiency

• 6.0V to 30V Input Range

• 210kHz Switching Frequency

• Adjustable Output Voltage

• Cycle-by-Cycle Current Limit Protection

• Thermal Shutdown Protection

• Frequency Foldback at Short Circuit

• Stability with Wide Range of Capacitors,

Including Low ESR Ceramic Capacitors

• SOP-8 Package


APPLICATIONS


• TFT LCD Monitors • Portable DVDs

• Car-Powered or Battery-Powered Equipments

• Set-Top Boxes • Telecom Power Supplies

• DSL and Cable Modems and Routers

• Termination Supplies



PIN DESCRIPTION

PIN NUMBERPIN NAMEPIN DESCRIPTION
1BSBootstrap. This pin acts as the positive rail for the high-side switch’s gate driver. Connect a 10nF between this pin and SW.
2INInput Supply. Bypass this pin to G with a low ESR capacitor. See Input Capacitor in Application Information section.
3SWSwitch Output. Connect this pin to the switching end of the inductor.
4GGround.
5FBFeedback Input. The voltage at this pin is regulated to 0.808V. Connect to the resistor divider between output and ground to set output voltage.
6COMPCompensation Pin. See Compensation Techniques in Application Information section.
7ENEnable Input. When higher than 0.8V, this pin turns the IC on. When lower than 0.8V, this pin turn the IC off. Output voltage is discharged when the IC is off. This pin has a small internal pull-up current to a high level voltage when pin is not connected. Do not allow EN pin to exceed 6V.
8N/CNot Connected.

China High Input 2A Step Down Converter 2A Output Current Up to 95% Efficiency  210kHz Switching Frequency  ACT4065ASH supplier

High Input 2A Step Down Converter 2A Output Current Up to 95% Efficiency 210kHz Switching Frequency ACT4065ASH

Inquiry Cart 0