Microchips And Integrated Circuits SN74HC132N Schmitt Trigger Inputs

Brand Name:TI
Certification:Original Factory Pack
Model Number:SN74HC132N
Minimum Order Quantity:20
Delivery Time:1
Payment Terms:T/T, Western Union,Paypal
Contact Now

Add to Cart

Site Member
Location: Shenzhen Guangdong China
Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China
Supplier`s last login times: within 25 hours
Product Details Company Profile
Product Details

Microchips And Integrated Circuits SN74HC132N Schmitt Trigger Inputs


Features

Wide Operating Voltage Range of 2 V to 6 V

Outputs Can Drive Up To 10 LSTTL Loads

Low Power Consumption, 20-µA Max ICC

Typical tpd = 14 ns ±4-mA Output Drive at 5 V

Low Input Current of 1 µA Max Operation From Very Slow Input Transitions

Temperature-Compensated Threshold Levels

High Noise Immunity

Same Pinouts as ’HC00


description/ordering information

Each circuit functions as a NAND gate, but because of the Schmitt action, it has different input threshold levels for positive- and negative-going signals. The ’HC132 devices perform the Boolean function Y = A • B or Y = A + B in positive logic. These circuits are temperature compensated and can be triggered from the slowest of input ramps and still give clean jitter-free output signals.


TAPACKAGE†

ORDERABLE

PART NUMBER

TOP-SIDE MARKING
−40°C to 85°CPDIP − NTube of 25SN74HC132NSN74HC132N
SOIC − DTube of 50SN74HC132DHC132
Reel of 2500SN74HC132DR
Reel of 250SN74HC132DT
SOP − NSReel of 2000SN74HC132NSRHC132
SSOP − DBReel of 2000SN74HC132DBRHC132
TSSOP − PWTube of 90SN74HC132PWHC132
Reel of 2000SN74HC132PWR
Reel of 250SN74HC132PWT
−55°C to 125 C to 125°CCDIP − JTube of 25SNJ54HC132JSNJ54HC132J
CFP − WTube of 150SNJ54HC132WSNJ54HC132W
LCCC − FKTube of 55SNJ54HC132FKSNJ54HC132FK

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†


Supply voltage range, VCC −0.5 V to 7 V

Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) ±20 mA

Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) ±20 mA

Continuous output current, IO (VO = 0 to VCC) . ±25 mA

Continuous current through VCC or GND . ±50 mA

Package thermal impedance, θJA (see Note 2):

D package 86 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . °C/W

DB package 96 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . °C/W

N package 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . °C/W

NS package 76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . °C/W

PW package 113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . °C/W


† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.


PARAMETER MEASUREMENT INFORMATION

China Microchips And Integrated Circuits SN74HC132N Schmitt Trigger Inputs supplier

Microchips And Integrated Circuits SN74HC132N Schmitt Trigger Inputs

Inquiry Cart 0