DIN 7/16 connector female jack 1-1/4" flex cable antenna base station DIN-K-114S

Contact Us :

• Name :Carl Wu
• Email : wubo@joytak.com (Please do not leave message on website)
• Skype : carl-wu1984
• Mobile : +86-137 7536 7513
• www.gctechnol.com
• www.joytak.com

DIN 7/16 female jack for 1-5/8" feeder cable

Features & Benefits
• Low IMD and low VSWR provides improved system performance.
• Self-flaring design ensures ease of installation with standard hand tool.
• Pre-assembled gasket protects against dust (P68) and water (IP68) per IEC 169.
• Limited internal junctions reduce sources of IMD.
• Silver-plated contacts and silver or white bronze-plated bodies deliver a high conductivity and corrosion resistance for a long, trouble-free life.
• Easy-Hex coupling nut allows tightening by hand or with a standard wrench for ease of mating.

Applications
• Antennas • Base Stations • Broadcast
• Cable Assembly • Components (Control) • Lightning Protection
• Satcom

• 7/16 Corrugated Cable Specifications
• Electrical
• Impedance 50 Ω
• Frequency Range DC - 7.5 GHz
• Return Loss
• 30 dB @ DC - 1.0 GHz (3 ft. assembly)
• 28 dB @ 1.0 - 2.0 GHz
• 21 dB @ 2.0 - 3.0 GHz
• RF-Leakage 125 dB minimum
• Voltage Rating (at sea level) ≥ 813 Vrms (depending on cable)
• Average (Peak) Power Maximums 3.0 kW (13.2 kW)
• Contact Resistance
• center contact: ≤ 0.4 mΩ
• outer contact: ≤ 1.5 mΩ
• Insulation Resistance 5,000 MΩ minimum
• Insertion Loss Maximum 0.05 dB @ 1 GHz
• Dielectric Withstanding Voltage 2,300 Vrms (at sea level)
• 3rd order Inter-Modulation Distortion
• -120 dBm/ - 165 dBc typical (+43 dBm carriers)
• Mechanical
• Mating M29 x 1.5 threaded coupling nut
• Attachment Method (inner/outer) captivated/compression
• Coupling Torque, min./max. 15/20 lb-ft (20/28 N-m)
• Coupling Nut Retention force 225 lbs (1000N) min.
• Assembly Torque (body/clamp nut) positive stop, 18/20 lb-ft (25/30 N-m)
• Durability (matings) 500 cycles min. (DIN 47275, 2/10.82 section 2.10)
• Environmental
• Temperature Range -65°C to +165°C
• Thermal Shock IEC 68, part 2-14, test Na
• Immersion IEC 529, IP68
• Corrosion IEC 68, part 2-1, test Ka
• Vibration IEC 68, part 2-6
• Mechanical Shock IEC 68, part 2-27
• Material
• Male Contact Brass
• Female Contact Beryllium copper
• Other Metal Parts Brass per ASTM-B16, silver or white bronze plated
• Insulator PTFE per ASTM-D1457
• Gasket Silicone rubber (weatherproof), ZZ-R-75
• Protective Coating Clear chromate (on silver plating)
• Note: These characteristics are typical but may not apply to all connectors.

• 7/16 Semi-Rigid & RG Cable Specifications
• Electrical
• Impedance 50 Ω
• Frequency Range DC - 7.5 GHz
• VSWR 1.3 max. @ DC - 7 GHz
• RF-leakage 125 dB minimum
• Voltage Rating (at sea level) ≥2,700 Vrms (depending on cable)
• Contact Resistance
• center contact: ≤ 0.4 mΩ
• outer contact: ≤ 1.5 mΩ
• Insulation Resistance 5,000 MΩ minimum
• Dielectric Withstanding Voltage 4,000 Vrms (at sea level)
• 3rd order Inter-Modulation Distortion -120 dBm / -165 dBc typical (+43 dBm carriers)
• Mechanical
• Mating M29 x 1.5 threaded coupling nut
• Attachment Method (inner/outer) captivated or solder/solder
• Center Conductor Cable Affixment Socket or solder
• Coupling Torque, min./max. 15/20 lb-ft (20/28 N-m)
• Coupling Nut Retention Force 225 lbs (1000N) min.
• Durability (matings) 500 cycles min. (DIN 47275, 2/10.82 section 2.10)
• Environmental
• Temperature Range -65°C to +165°C
• Thermal Shock IEC 68, part 2-14, test Na
• Immersion IEC 529, IP68
• Corrosion IEC 68, part 2-1, test Ka
• Vibration IEC 68, part 2-6
• Mechanical Shock IEC 68, part 2-27
• Material
• Body and Outer Contacts Brass per ASTM-B16, silver or white bronze plated
• Male Contact Brass
• Female Contact Beryllium copper
• Other Metal Parts Brass per ASTM-B16, silver or white bronze plated
• Insulator PTFE per ASTM-D1457
• Gasket Silicone rubber (weatherproof), ZZ-R-75
• Protective Coating Clear chromate (on silver plating)
• Note: These characteristics are typical but may not apply to all connectors.

About Us

Since its establishment in 2010, we have determined to provide customers with a full range of high-quality, competitive RF products, from RF connectors, cable assemblies, to various passive components, RF coaxial cables, and various antennas.

The products are widely used by China Mobile, China Telecom, Amphenol, antenna factories and trading companies from worldwide.

Customers from Slovakia, India, Japan, Korea, France, Italy, Russia, Lativa, South Africa, Australia, US, etc. who has established long term cooperation with us because of professional RD, premium quality control, high effective feedback and reasonable price. Also one-stop-service is provided to cusutomers with antennas, feeder cable, splitter, coupler and other IBS components.

The factory is located in Danbei Town, Danyang City, Jiangsu Province. It is close to Nanjing, Changzhou, Wuxi and Suzhou. Take CRH to Shanghai for 2.5 hours.

We sincerely welcome you to visit our factory, any questions and inquiries, please feel free to contact us.

Products categories:

1. RF adapters (male to male, male to female, female to female, RP series)

2. RF connectors : Mini DIN 4.3-10, 4.1-9.5, DIN 7/16, N type, TNC, QMA, 1.0/2.3, SMA, SMB, SMZ, MCX, MMCX etc. for all kinds of RG401, RG402, RG405, RG174, RG178, RG179, RG316, RG142, RG58, RG59, RG223, RG213, RG214, LMR100, LMR195, LMR200, LMR240, LMR300, LMR400, LMR600, 3D-FB, 5D-FB, 7D-FB, 1/2", 1/4", 3/8", 7/8", 1-5/8" feeder cable, corrugated foam and superflex types.

3. Coaxial connectors : F Type, PAL(IEC), BNC, RCA, ( compression, crimp, PCB mount )

4. RF Attenuators

5. Lightening Arrestors

6. RF Cable Assebmlies (waterproof boot, shrink tube and feeder cover-hot polyamide moulding )

7. Precision CNC Machining

8. Feeder Cables (Brand: Hansheng, Hengxing, Kingsignal etc, Type: 1/2", 1/2"SF, 7/8", RG59, RG6, RG174, LMR400 etc.)

9. Antennas (3G/4G/5G)

10. RF components and IBS components (splitter,coupler, combiner, 3M tape, cable clamp, Ground copper bar, Grounding kits, electric cabinet, Heat Shrink Sleeve etc.)