
Add to Cart
Outdoor DIP 3 in 1 led display advantage:
1.Excellent Color Mix : RGB 3-color mix inside of one lamp. Outdoor DIP 3 in 1 module puts RGB 3 chips into one lamp and one lamp is one pixel.
2.Closer View-Distance: You won't see any RGB lamps even if you see it so close at 3meter distance!
3.Better Contrast Rate: Only one lamp in one pixel gives more black background on module which creates better contrast rate.
4.Save Cost:Using only one lamp instead of 3, cost saving up to 30% compare to traditional module.
P6.94 outdoor DIP 3 in 1 led display parameter:
| 1,LED Parameter | |||
| LED Type | Encapsulation type | Wavelength | Brightness |
| DIP3in1 | 570 | R:625-630nm | ≥2100m |
| G:515-520nm | ≥4200mcd | ||
| B:465-470nm | ≥700mcd | ||
| 2,LED Unit Cabinet Parameter | |||
| Aurora Beam | P6.9 | P6.9 | P10.4 |
| Pixels Configuration | DIP 3 in 1 full color (DIP570) | DIP 3 in 1 full color (DIP570) | DIP 3 in 1 full color (DIP570) |
| Module Size | 500*500mm | 500*500mm | 500*500mm |
| Pixel Pitch | 6.944mm | 8.33mm | 10.41mm |
| Pixels Density | 20736Dots/㎡ | 14400Dots/㎡ | 9216Dots/㎡ |
| Unit Cabinet Resolution | 36*36Dots | 30*30Dots | 24*24Dots |
| Scan Mode | 6 scan | 5 scan | 4 scan |
| Brightness | ≥7500CD/㎡ | ≥7500CD/㎡ | ≥6000CD/㎡ |
| Weight | 45Kg/㎡ | 40Kg/㎡ | 38Kg/㎡ |
| Max Power Consumption | 800W/㎡ | 600W/㎡ | 800W/㎡ |
| Installation Method | Rental/Fixed | Rental/Fixed | Rental/Fixed |
| Visual Angle | H120°V60° | H120°V60° | H120°V60° |
| Protection Grade | IP66 | IP66 | IP66 |
| 3,System Parameters | |||
| Color Temperature | 4500-25000K adjustable | ||
| Operating Power | AC100-240V 50-60HZ | ||
| Continuous Working Time | ≥72 Hours | ||
| MTBF | ≥10000 Hours | ||
| Pixels Out of Control Rate | <1/10000(Industry standard) | ||
| Using Ambient Temperature | -40℃∽+80℃ | ||
| Humidity | 10℃∽95℃ | ||
| Gray Scale | 14-16 Bit | ||
| Frame Rate | ≥60H | ||
| Refresh Rate | ≥3000Hz | ||
| Calibration | Support point by point correction | ||