

Add to Cart
frequncy pulse to current/voltage signal converter(F/V,F/I
converter) Selection Example:
Example 1:Signal Input: 0-10KHz (5V voltage pulse );Signal Output :
0-10VDC;Power Supply:12VDC;Model:JSD TFA-1001-233
Example 2:Signal Input: 0-5KHz ( Open collector );Signal Output :
4-20mA;Power Supply:24VDC;Model:JSD TFA-1001-511
Example 3:Signal Input: 0-15KHz (5V voltage pulse );Signal Output :
0-20mA;Power Supply:9-36VDC;Model:JSD TFA-1001-UW2
0~20KHz/0~10KHz/0~5KHz to 4-20mA/0-10V pulse converter (F/V,F/I
converter) Features:
Low cost, thin design, international standards DIN35mm rail
mounting
Three-port isolation (input, output and power supply )
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S),High isolation voltage (3000VDC/60S)
Low temperature drift (80PPM/ºC)
Industrial class operation temperature (-45~+85ºC)
Ultra-wide range power supply design (9~36VDC single power)
International standard signal input
(0~20KHz/0~15KHz/0~10KHz/0~5KHz/1~5KHz/0~2.5KHz etc.)
International standard signal output(0~5V/0~10V/1~5V/0~20mA/4~20mA)
pulse converter (F/V,F/I converter) Application:
Converting the square wave, sine wave, sawtooth wave into
international standards analog signals
Converting unit pulse signal into DC voltage (current) signal
signal ground interference suppression and analog isolation,
acquisition, conversion, and long-distance transmission
Industrial signal isolation and long-distance transmission without
distortion
instrumentation and sensor signal transceiver
motor speed monitoring and testing
power monitoring and signal acquisition
overcome interference and analog signal acquisition between various
devices, isolation, transformation and long-distance transmission
monitoring and measuring various frequency pulse signal equipment
(F/V,F/I converter) general description:
Jieshengda Technology(JSD) JSD TFA-1001 ultra-thin series
1-in-1-out frequency pulse signal to analog signal converter(F/V
converter) is a high accuracy isolation transmitter. it can isolate
and transform the inputting pulse signal(square wave, sine wave,
sawtooth wave) into international standards analog current/voltage
signal and long-distance transmission without distortion to the
control room((such as:PLC,DCS,AD,PC acquisition cards) with
corresponding digital pulse frequency signal. its internal
integrated multiple low-power high precision high efficiency DC-DC
converter to supply power to the input and output, the pulse signal
converter is adopted SMD chip technology and modular design makes
its isolation voltage between input/ouput and power supply is up to
3000VDC, JSD TAF-1001S series V/F pulse signal converter is adopted
high-voltage clamp to the inputting frequency signal. current mode
convert into frequency signal has a higher Anti-jamming performance
compare to voltage mode, the pulse converter uses two input forms:
pulse signal input and open collector input for compatible with
more frequency pulse sensor, instrumentation equipment. Pulse
converter is adopted international standards DIN35mm rail
installation for user-friendly control panel installed. For
dual-channel F/V converter Please choose JSD TFA-2002 series,
analog to frequency pulse signal (V/F converter) please choose
ultra-thin series JSD TAF-1001S, conventional series JSD TAF-1001,
JSD TAF-1002, JSD TAF-2002 series.
more isolation transmiter datasheet www.jsd-iae.com