RS232/RS485 to 4-20mA D/A converter

RS232/RS485 to 4-20mA D/A converter

Product Selection:

JSD DA-A02 - □ - □

Interface Voltage or Current outputting code

485:Input is RS-485 interface VO1:0-5V IO1:0-1mA

232:Input is RS-232 interface VO 2:0-10V IO2:0-10mA

VO 3:0-75mV IO3:0-20mA

VO 4:0-2.5V IO4: 4-20mA

VO5:0-±5V IO5 :0-±1mA

VO 6:0-±10V IO6:0-±10mA

VO 7:0-±100mV IO7:0-±20mA

VO 8:user-defined IO8:user-defined

RS232/RS485 to 4-20mA D/A converter selection example:
Sample 1: Model:JSD DA-A02-485-IO4 RS-485 Interface,4-20mA signal output
Sample 2: Model:JSD DA-A02-232-VO1 RS-232 Interface,0-5V signal output

RS232/RS485 to 4-20mA D/A converter Features and application:
● Low cost, small size modular design
● RS-485/232 Interface, Analog signal acquisition, isolated output
● Output accuracy>0.2%
● Can be remotely reconfigured for modules accuracy
● Three-port isolation (input/output/power supply): 3000VDC /60s
● Wide operating power supply: 8 ~ 32VDC
● High reliability, easy programming and installation
● International standard DIN35mm rail mounting for easy centralized wiring
● Can Program setting module address, baud rate , etc.
● Can set the host to read the JSD DA-A02 data to achieve remote acquisition
● Supports Modbus RTU
● RS-232/485 bus industrial automation control systems
● Industrial control signal isolation and long-term transmission
● Equipment operation Commissioning and control
● The sensor signal remote transmission and signal reduction
● Industrial field actuator data given
● Medical, industrial product development
● Intelligent building control, security engineering and other applications
● Standard analog signal output
● 4-20mA signal output

D/A converter General Description:
JSD DA-A02 series realize host RS-485/232 interface signal isolation converted into a standard analog signal, to control the remote device. JSD DA-A02 products can be applied to RS-232/485 bus industrial automation control system,4-20mA /0-5V/0-10V standard signal output, to control industrial site execution set equipment, control equipment and display instrument. Products include power supply isolation, signal isolation, linearization, D/A conversion and RS-485 serial communication. Each serial interface can connect up to 256 pieces JSD DA-A02 Series modules, communication using ASCII code or MODBUS RTU communication protocol, and its instruction set compatible with the ADAM modules, baud rate can been set by the code, with other manufacturers control module hang in the same RS-485 bus for easy programming.
JSD DA-A02 series products are based on SCM's intelligent monitoring and control system, users set the calibration value, address, baud rate, data format, checksum status, and configuration information are all stored in nonvolatile memory EEPROM.
JSD DA-A02 products are according to industry standard design, isolation between signal output / communication interface, can withstand voltage 3000VDC, high anti-interference ability and reliability. Operating temperature range is - 45 ~ +85°C.
Function Description:
JSD DA-A02 signal isolation D/A converter module can be used to output one channel voltage or current signal, can also be used to output two common ground current or voltage signal.
1. Analog signal output 12-Bit acquisition accuracy, all products signal input range have been calibrated. In use, users also can program calibration easily. About the specific current or voltage input range, please see product selection. when need two channels signal output, signal value must be the same.
2. Communication protocol
Communication Interface: one channel standard RS-485 communication interface, or one standard RS-232 communication interface, specify when ordering.
Communication Protocols: supports two protocols, characters protocol of the command set defined and MODBUS RTU communication protocol. Can be programmed using the kind of communication protocol, can be achieved with PLC, RTU of many Brands or computer monitoring system for network communication.
Data Format: 10 Bits. 1 start bit, 8 data bits, 1 stop bit.
Address: (0 to 255) and baud rate (2400, 4800, 9600, 19200, 38400 bps) can be set, the most long-distance about communication networks is up to 1200 meters, through the twisted-pair shielded cable. Communication interface of high anti-jamming design, ± 15KV ESD protection, communication response time is less than 100mS.
3. Anti-jammingAccording to need to set the checksum. Module internal has transient suppression diodes, can inhibit a variety of surge pulse, protection module, and internal digital filter can also be well suppressed from the grid frequency interference.

Shenzhen Jieshengda Technology Co., Ltd. is a is a high-tech enterprise for dedicating to professional R&D isolated transmitter, isolation amplifier,4-20mA Isolation Amplifier,active two-wire isolation amplifier, active isolation amplifier (optocoupler isolation and magnetic isolations), mV-level isolation amplifier, isolation power transmitter, PT100 RTD temperature transmitter,signal isolation transmitters, power isolation transmitter, fence, V/F frequency isolation transformer, resistors，switch signal isolation transmitter, pressure transmitter,F/V frequency isolation transmitters, non-isolated amplifier, data acquisition, AC-DC converter ，DC-DC converter, high-voltage converter, Medium-power converter, micro-power DC-DC converter, LED lights. Self-developed products meet international standards, products performance reliability and passed EMC Certification (CE certification), the input and output signals are adopting international standard signal designs. (eg: 0~±20mA/0~10V/0~20mA/0~5V/4~20mA/1~5V/0~±10mA/0~±10V, etc.) compatible with the vast majority of domestic and foreign well-known brands ,our products categories covering more than thousands, is industrial automation applications analog signals, digital signals hybrid integrated circuit development, and manufacturing companies.

By all the people’s unremitting efforts ,our products has been widely used in the electricity, telecommunications, instrumentation, industrial measurement systems, medical equipment, industrial intelligence, intelligent cars, intelligent building control, automotive electronics, security, environmental protection, food, heating and air conditioning systerms, water treatment, petrochemical, coal mining , metallurgy, shipbuilding, military and other fields , At the same time providing hidh quality products to customers in different areas, to provide different functions of products, to offerr customized products, to provide customers with a reasonable solution and so on.

Jieshengda establish a "people-oriented, customer first, forge ahead, and common development" for business purposes, "honesty, pragmatism, dedication, innovation" for management philosophy, the company relies on technology and development, and constantly provide customers with high-tech products, is up to people of all Jie Sheng constant pursuit. Continue to provide users with high-tech products is Jie Sheng da techonology constant pursuit

Today ,Jieshengda pursuing "rigorous and realistic progressive unity", continuous innovation, "technology as the core, depending on the quality of life, with action to prove", dedicated to providing high quality products, at the same time to provide you with the most professional one-stop service.