

Add to Cart
4-20mA to frequency pulse transmitter I/F V/F converter Features:
Low cost, ultra-thin design, international standards DIN35mm rail
mounting
Three-port isolation (input, output and power supply )
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (80PPM/℃)
Wide industrial class operation temperature (-45~+85 Celsius)
High reliability (MTBF>50 Wan hour)
Ultra-wide range power supply design (9~36VDC single power)
International standard signal input
(0~5V/0~10V/1~5V/4~20mA/0~20mA/0~10mA/0~2.5Vetc.)
International standard signal output
(0~5KHz/0~10KHz/1~5KHz/0~15KHz/0~20KHz/0-30KHz etc.)
4-20mA to frequency pulse transmitter I/F V/F converterApplication:
◆ Converting the square wave, sine wave, sawtooth wave into international standards analog signals
◆ Converting unit pulse signal into DC voltage (current) signal
◆ signal ground interference suppression and analog isolation, acquisition, conversion, and long-distance transmission
◆ Industrial signal isolation and long-distance transmission without distortion
◆ instrumentation and sensor signal transceiver
◆ motor speed monitoring and testing
◆ power monitoring and signal acquisition
◆ overcome interference and analog signal acquisition between various devices, isolation, transformation and long-distance transmission
◆ monitoring and measuring various frequency pulse signal equipment
frequency pulse converter have current/voltage to frequency pulse I/F,V/F converter and frequency pulse to current/voltage F/V,F/Iconverter,so pls choose as following:
4-20mA/0-10V to 0-5KHZ/0-10KHZ frequency pulse transmitter I/F V/F
converter Selection Example:
Example 1:Signal Input: 4-20mA;Signal Output :0-10KHz (5V voltage
pulse);Power Supply:9-36VDC;
Model:JSD TAF-1001S-DW2
Example 2:Signal Input:0-5VDC;Signal Output:0-5KHz (Open
collector);Power Supply:24VDC;
Model:JSD TAF-1001S-114
Example 3:Signal Input:4-20mA;Signal Output:0-5KHz (5V voltage
pulse);Power Supply:15VDC;
Model:JSD TAF-1001S-D21
Example 4:Signal Input:1-5V;Signal Output:0-15KHz (5V voltage
pulse);Power Supply:36VDC;
Model:JSD TAF-1001S-UWU
Example5:Signal Input:0-10V;Signal Output:0-50KHz (Open
collector);Power Supply:24VDC;
Model:JSD TAF-1001S-21U
General Description:
Jieshengda Technology(JSD) JSD TAF-1001S ultra-thin series
1-in-1-out analog to frequency pulse signal converter is a high
accuracy isolation transmitter.it can isolate and transform the
inputting analog voltage/current signal into corresponding digital
pulse frequency signal . JSD TAF-1001S series V/F frequency pulse
signal isolation transmitter adopts ultra-thin shell and ultra-wide
operating power supply design, its internal SMD chip technology and
modular design makes the performance is more stable and reliable,
The new isolation technology makes the product achieve three-port
isolation (input, output and power supply),and the isolation
voltage between them is up to 3000VDC. The V/F frequency pulse
signal converter is widely used in phase modulation, frequency
modulation, analog/digital conversion, digital voltmeter, data
measurement and remote telemetry remote control device. The product
has been corrected, the transmitter isolation adopts international
standard DIN35mm rail installation for easy user installation. If
the product fails to meet user, we provide customized. if need
putting feeding power to two-wire sensor please purchase JSD
TAF-1021S series or JSD TAF-2002 2-in-2-out analog to frequency
pulse converter, data sheet please contact Jieshengda technology .