

Add to Cart
Physical Infrared SPA Capsule Spectra Therapy Space For Far Infrared Dry-steaming
The heat energy spaceship absorbs the intelligence of the science
of medicine including
color light therapy,heat therapy and aromatherapy,and the science and technology of
physics and electronics.It also combines the essence of Chinese
traditional medicine and
western science and technology to concentrate the boundless
universe on an environment
spaceship which can be freely controlled to let one's soul seek his
dream and imagination
to his heart’s desire.In this independent spaceship,the
essence,breathing and spirit of
a human body are combined.The red infrared will resonate to massage
the fatty cells in
the way of radiation resonance and soften the fat and produce minor
heat,improve blood
circulation,activate muscles and bones and increase the overall
metabolism in the body.
The abundant negative ion will make you feel like being soaked in a
forest to thoroughly
remold yourself.In terms of beautifying the skin,it can
deep-cleanse the skin and clean
the pores to strengthen the deep penetration and absorption of
oceanic products so as to
achieve the effects of whitening,keeping the moisture,increasing
elasticity of the skin
and preventing from the wrinkles.In terms of beautifying the
body,it can open the pores
in the skin to heat the body to improve the metabolism.
Major functions:
1. Heat therapy:the infrared light wave will act upon endermic fat
to increase the
combination of fat and oxygen(i.e.burn the fat) and discharge the
liquidized fat outside
the body with sweat.20-30 minutes of use can consume 600 calories
of energy,which is
equal to the consumption of running for 100,000 meters.The
temperature inside the
spaceship can be as high as 90 degrees,which can improve lymph
circulation to discharge
the toxic and surplus water inside the body to slim the body.It has
been proved by the
science of medicine that it has some assistant functions to
arthritis and rheumatism.
2. Color light therapy:by adopting brand-new color light therapy,
the specially-designed
light source radiates color light wave to improve the metabolism of
human cells.It has
different functions to various kinds of problematic skins.
3. Negative ion facial breeze:it adopts negative ion breeze to
adjust the metabolism of
the skin,increase the elasticity of skin,delay aging and ease local
muscle injury and
pain.
4. Aromatherapy:based on the essence oil vent, it can be combined
with essence oil of
plants with different functions to go into by absorption the
internal organs to treat
physically,soul and spirit.
5. Bacteria-killing system:it can deep-cleanse the capillary pores
and eliminate all the
harmful heavy metal substance in your body.
6. Musical therapy:it is equipped with CD appliance to relax human
mind, eliminate
tiredness and supply energy.Instruction on functions of the panel
Introduction to various
parts of the panel
POWER:the overall power supply of the machine
SELECT:press this button and the lower right corner of "B" or "C"
windows will display a
little red dot to represent the selected.
START:it is the button to permit output when the selected little
red dot will flicker and
at the same time “B” and “C” display the actual temperature in the
spaceship.
A: Time display
B: Temperature display in the upper spaceship
C: Temperature display in the lower spaceship
D: Time display for ozone disinfection system.Press the PZONE
button to start the ozone
function with the maximum setting being 30 minutes.
TIMER: System time set,it has both increase and decrease buttons
with a maximum value of
60 minutes.
TEMP SET: System temperature set.The adjustment buttons are for
adjusting tens digit and
one digit respectively.When the machine starts the display is
35℃.The adjustment range
is 0℃-90℃ with the maximum setting of 99℃.
Timer: Ozone time adjustment,usually it is 15 minutes.
OZONE: ozone start/stop button.
Instruction on the procedures of operating the machine
1. Start the power supply “POWER”.
2. Start the ozone for 5-10 minutes.(After each time of operation,
start the ozone
independently for 15 minutes to disinfect the spaceship
completely).
3. Press the button of “SELECT”.
4. Adjust the temperature set(the temperatures in the upper and
lower spaceships),usually
it is adjusted to 75℃-90℃ as far as it is comfortable.
5. Adjust the time and usually it is 30 minutes.
6. Press “START”:the machine will start to operate with a display
of the actual
temperature inside the spaceship.
7. For operations of the CD player,refer to the display operation on the CD player.
Function configuration
1. Time set
2. Temperature set
3. Far infrared dry-steaming
4. Negative ion breeze
5. Ozone bacteria-killing system
6. Spectrum therapy
7. Aromatherapy
8. CD configuration
Note: it is configured additionally
Instruction:when the upper spaceship is started for
dry-steaming,the negative ion breeze
and spectrum are started at the same time.When the temperature
rises to the set value,the
negative ion breeze and the spectrum will automatically shift to
the natural wind and the
natural light (i.e. they will be start for 1 minute with a pause of
30 seconds)to recycle
repeatedly to give you a feeling of being in a forest.
The functions of wide band far infrared
Due to the large size of this product, disassembly must be done
when it is restricted by
space.
1. Move the mattress.
2. This procedure needs cooperation of three people.Two people
support the upper
spaceship while the other person holds the supporting pole and
turns counterclockwise to
remove the pole or the fixing clip.
Note: do not remove the upper and lower fixing screws because they
are difficult to
assemble.
3. The two people stand the upper spaceship up to form an angle of
130-150 degrees with
the lower spaceship so that the whole spaceship goes indoors in the
shape of S.(This is
one of the methods).
4. Separate the upper and lower spaceships completely,remove the
semi-circle covers in
the back of the upper and lower spaceships and plug out carefully
all the plugs connected
to the upper spaceship.
Note: when plugging out these plugs, note down the respective
proper positions with pen
for later assembly. )
5. After removing the supporting poles (as in step 2),the two
people stand the upper
spaceship up to form an angle of 90 degrees with the lower
spaceship and the other person
removes the two fixing screws before pulling out the bolts at two
ends. Counter the
disassembly order when doing the assembly.
Technical parameters
Operation voltage: AC220V-AC250V
Frequency: 50Hz/60Hz
Maximum operation current: 8A
Maximum power: 1500W
Average power consumption: 800W/h (20℃ of environment)
Length of product: 220cm
Width: 86cm
Height: 95cm
Height when stretched: 95cm
Packaging size: 240*100*115cm