TOBO STEEL Group ASTM A815 WPS32750 reducing tee

ASTM A815 WPS32750 reducing tee

A815 / A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

Elbow, pipe fittings,cap, stud end,straight tee,reducer, cross, end cap, bend pipe, return bend.

ELBOWS- 90 DEGREES LR ,45 DEGREES LR, 90 DEGREES SR, 45 DEGREES SR, 90 DEGREES LR RED ELBOW,

180 LR RET. BEND, 180 SR RET BEND,

TEES, RED TEES,

CONCENTRIC REDUCER, ECCENTRIC REDUCER,

CAP, ASME LAP JOINT STUB END LONG PATTERN, ASME LAP JOINT STUB END SHORT PATTERN,

MSS LAP JOINT STUB END TYPE A OR TYPE B OR TYPE C,

45 DEGREE LATERAL, CROSS, 45 DEGREES 3 D ELBOW, 90 DEGREES 3 D ELBOW, 45 DEGREES 6D ELBOW

2. Em ail--------------sunnyofsteel at gm ail c om

3. thickness SCH 5S~XXS

Super Duplex stainless

ASTMA815 UNS S31803 S32750 S32760 S31254 S32205

Duplex stainless 2205 2507 254SMO

EN DIN 1.4462 1.4410 1.4501 1.4547

ASTM A 815 & ASME SA815, WP UNS S32550 (ALLOY 255 DUPLEX) FERRALIUM,

WP UNS S31803 (ALLOY 2205 DUPLEX) W OR S, UNS S32205 (ALLOY 2205+2 DUPLEX) W OR S

ASTM A 815 & ASME SA815, WP UNS S32750 (ALLOY 2507 SUPER DUPLEX),

WP UNS S32760 (ZERON 100 SUPER DUPLEX) W OR S

4. Standard ASME B16.9 MSS SP-43

5. Packing: case or tray

6. Delivery according to qty

7. Usage Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc

8. Accept the 3rd party to test (SGS BV TUV, etc)

Tobo Pipeline Equipments(Shanghai)Co., Ltd., is located in Shanghai, we are one of the biggest manufacturers Pipeline products in China. We are intelligent entity specializing in developing, manufacturing and selling pressure pipe units. The main products contain flanges, elbows, tees, reducers, bends, stub ends, caps, forged socket welding fittings and threaded fittings and the materials of its products contain carbon steel (A105, A106, 20#, 20G, Q235, 16Mn), stainless steel (304, 304L, 316, 316L, 1Cr18Ni9Ti) and alloy steel(12Cr1MoV, Cr5Mo, 10CrMo910, 15CrMo, ASTM A234 WP1, WP12, WP11, WP22). All products can be manufactured upon some standards such as American Standard ASME/ANSI and MSS, German Standard DIN, Chinese Standard GB/T, SH, HG, JB, SY and Japanese Standard JIS, while some non-standard products can be manufactured In addition, the insoluting joint developed and manufactured by our company can be widely applied to cathodic protection system of steeliness pipeline used in delivering oil, gas and water