Add to Cart
Metal Shutter Door Slat Shutter Door Roll Forming Machine With 0.7-1.2mm Thickness
Rolling shutter door is produced by rolling shutter making machine and are used for parking door and home doors ans shops front show and garages, etc. They are very strong and sage to the property. Therefore, the door-rolling shutter provides adequate protection and safety against thefts and fire. These doors are stronger if use enough steel thickness.
In fact, we can supply different kinds of roll forming machines for different shutter doors. If you have your door design, show us your design drawing. A good suggestion can be given out by our enginneer. If you have any idea about your new project, some professional ideas can be gotten from us.
1.This machine is made up of roll forming machine,manual decoiler,cutting machine,PLC computer control and hydraulic system,out put tables.
2.The machine is stable,no noise,no shake.
3.It is one unit, the control box and the hydraulic station for the cutting are all put under the machine frame to save space.
4.The touch screen is hang over, it is not under the floor.
5.When you get the machine,it is no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working.
Material of coil | Material Thickness | 1.5-2mm galvanized |
Un Coiler | 3 tons manual | |
Forming system | Rolling Speed | About 8-12 m/min |
Roller Stations | About 16-18 stations | |
Roller Material | Gcr15# Steel with quenching 60mm shaft | |
Maim Motor Power | 7.5 kw | |
Hydraulic cutting Power | 4 kw | |
Cutting | Material Of Cutting | CR12Mov with quench treatment |
Hardness | HRC58-62 | |
Tolerance | +-1.5mm | |
Electrical control system | Electric Source | 380V, 50HZ,3 phase |
Control System | PLC with touch screen | |
Weight | About 4 tons | |
Way Of Drive | 1 inch single chain | |
Size of machine | About Length 8500mm* Width 600mm* Height 1000mm |
Working flow:
Decoiler—→Level device—→Main roll forming machine—→Hydraulic
punching—hydraulic cutting& Punching→ Run out table
Profile drawing
Machine Picture Shows