Skid - mounted Cryogenic Air Separation Plant 500/1000Nm3/h Air Separation Unit Combustion Gas

Cryogenic Air Separation Plant 500/1000Nm³/h KDON-500/1000 Air Separation Unit Combustion Gas

Specifications:

The followings are the standard products for the Cryogenic Air Separation Plant KDON 500~1500 series which are manufactured by our company. For particular product can be calculated and designed based on the actual requirements.

Typical Product:500/1000Nm³/h KDON-500/1000 Air Separation Unit

Output, purity and pressure

Description:

The proposed Air Separation Plant employs a process in which air is purified by molecular sieve at normal temperature, and booster expansion turbine is used to produce refrigerating capacity. The feed air sucked through air intake is cleaned of dust and other mechanical impurities in air filter AF and compressed to a pressure by air compressor. The compressed air flows into air precooling system for being cooled. The air comes from the air precooling system with temperature reduced to saturated state flows into switched molecular sieve adsorber. The purified air is divided into three streams: one stream is fed out to be instrument air; another stream enters main heat exchanger to be cooled to the saturated temperature by reflux gas and then enters lower column; the rest, of which its content is similar with swelling capacity, enters booster to be boosted, and then enters main heat exchanger after it is cooled, then it is fed out of the middle portion and fed into expander, the expanded air is fed into lower column. Following preliminary rectification in lower column, the liquid air is obtained from the bottom of lower column and the liquid nitrogen is obtained from the top. Liquid air and liquid nitrogen drawn from lower column enter liquid air/liquid nitrogen subcooler to be subcooled and then it is fed into relevant position of upper column. Following further rectification, liquid oxygen is obtained. The waste nitrogen gas obtained at the top of upper column is fed out of cold box after it is subcooled in subcooler and re-warmed in main heat exchanger. Then it is discharged after meeting the need as the gas for regeneration of molecular sieve first.





Applications:

1. Water and wastewater treatment

2. Petroleum refining

3. Medical Gas

4. Balance Gas

5. Pulp & Paper

6. N2 Converter Rental

7. Depth refrigerant

Competitive Advantage:

1. High safety and reliability

2. Good performance characteristics

3. Wide application: it can be applied in dusty and wet regions.

4. Up-to-date international advanced air separation technology is incorporated

5. Rich historical experience over 60 years

6. Designed for long, stable and reliable running,

Hangyang Cryogenic Liquefaction Equipment Co., Ltd. is one of the holding subsidiaries of Hangyang Co.,Ltd.(stock code:002430), it is organized on the basis of the original Small Scale of ASU Company of Hangzhou Hangyang Co,.Ltd. It is the major engineering, research and manufacturing base for small size of ASU and liquefaction plants in China, It is located in Hangyang Manufacturing Base in Lin'an Economic Development Zone, the address of sales office is No. 592, Zhongshan North Road, Hangzhou. It undertakes engineering consulting, design and manufacture, assembled construction design, installation and commissioning and supply of parts for medium and small size of ASU with its professional quality. It is the main base of design, research and manufacture for the domestic medium and small size of oxygen/nitrogen generating plants, liquid oxygen/liquid nitrogen plants, oxygen/nitrogen liquefiers, high-purity nitrogen generators, vacuum pipes and Pressure Swing Adsorption (PSA) for oxygen/nitrogen generating, etc.; Meanwhile, it is also the professional manufacturer for integrated assembly or skid type of medium size of ASU for leaving workshop by Hangyang, its abilities of design and manufacture for integrated assembly of medium size of ASU reach the leading domestic level. Our company has the independent import and export trade qualification.

Our company possesses professional technical personnel teams of design and EPC engineering of ASU and also possesses design ability of product such as independent process calculation, project design, unit design, project EPC. The manufacture base of our company was relocated to new site in 2009. Recently, the floor area is 40.34 acres. Combinating with relocation, the imported and set-up professional manufacture production tools, moulds and equipment forms the manufacture ability for manufacture ASU whose capacity is below 30,000Nm3/h. Our company carries out the international administration concept and obtains authentication certificates of management system such as ISO9001, ISO14001 and OHSAS18001 of DET NORSKE VERITAS. Meanwhile, we obtains manufacturing license for pressure vessels manufacture D1 and D2, Zhejiang new high-tech enterprise certificate and small and medium-sized technology-based enterprise certificate, our company possesses impeccably professional manufacturing credentials for medium and small size of ASU.

Our company sets product research, manufacture, marketing and service in one to elaborately provide general customers superiorly coordinated service on the basis of decades experience in design and manufacture and administration concept by Hangyang. Products involve aspects such as metallurgy, petrifaction, electron, machinery, building materials and aerospace. Our products are not only sold well throughout China, but also sold to the West, and our company becomes the designated supplier for several well-known gases investment companies abroad. In the cooperation with transnational large gases companies, our company absorbs and imports the advanced design concept, strict administration program, exquisite manufacturing technology so as to lead our company to develop in the direction of diversification, exquisite products and large-scale. Hangzhou Hangyang Cryogenic Liquefaction Engineering Co., Ltd. undertakes EPC works of ASU under our company.