

Add to Cart
4G Lte Wire Automotive Motorcycle Car Realtime Tracking Locator Gps Tracking Device Vehicle Gps Tracker
Product Paramenters
Network | 2G/3G/4G |
GSM Frequency | LTE-FDD(B1/B3/B5/B8); |
LTE-TDD(B34/B38/B39/B40/B41); | |
WCDMA(B1/B5/B8); | |
Location Accuracy | <10 meters |
Location time | Hot start:≤2sec(open sky) Cold start:≤35sec(open sky) |
Antenna | Built-in GPS antenna; |
Operating Voltage | DC 9-100V |
Operating Temperature | -20℃~70℃ |
Operating Humidity | 20%~80% |
Built-in Battery | 200mAh(Standby 1 hour) |
Working time of backup battery | 1 hours |
GPS Size | 90*40*15mm |
Net weight | 50g |
Standard accessories | GPS tracker,Manual,Cable harness |
4G Lte Wire Automotive Motorcycle Car Realtime Tracking Locator Gps Tracking Device Vehicle Gps Tracker
Product Features
* Remote Tele-cut off (petrol/power)
Compel the vehicle to stop by breaking off the fuel connection
* Built-in 200mAh battery
The built-in battery can work 1-2 hours
* Built-in vibration sensor
Inhibiting GPS static drift
* ACC detection for ignition status
Be aware of the ignition status whenever you need
* Intelligent alarm
Instant alert for vibration,overspeed,geo-fence
* Tracked by: SMS, APP, Web
4G Lte Wire Automotive Motorcycle Car Realtime Tracking Locator Gps Tracking Device Vehicle Gps Tracker
Platform(free use)
1.supports up to 180 days historical route track;
2.supports electronic fence, out of the regional alarm;
3.supports deviate planning route alarm;
4.supports overspeed alarm;
5.supports serious collision warning (optional);
6.Support rollover warning (optional);
7.supports for report output;
4G Lte Wire Automotive Motorcycle Car Realtime Tracking Locator Gps Tracking Device Vehicle Gps Tracker
Installation
1.When selecting the installation location, if the windshield is
pasted with a metal insulation layer or heating layer, it will
reduce the GPS signal reception and cause the GPS to malfunction.
At this time, pay attention to changing the installation location
of the device.
2.When installing the GPS locator, avoid putting it together with
the emission source, such as wireless reversing radar, anti-theft
device, and other vehicle-mounted communication equipment.
3.It can be fixed with a cable tie, or stuck firmly with 3M Velcro
strong double-sided adhesive, except for strong magnetic adsorption
4.There are GSM antennas and GPS antennas inside the device. When
installing, make sure that the front is facing upward (toward the
sky), and the side facing the sky should not be close to metal
objects to block the internal GPS antenna to avoid affecting the
signal.
Contactor Details:
whatsapp: +86-13717161241
mobilephone: +86-13717161241
Wechat:+86-13717161241
website:www.gpstrackerlocator.com