Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
Brand Name:cartrack
Certification:CE/ROHS/FCC/SGS
Model Number:CA100F
Minimum Order Quantity:10 pcs
Delivery Time:1-10 working days after received your payment
Payment Terms:T/T or western Union or paypal
Contact Now
Add to Cart
Site Member
Location:
Shenzhen Guangdong China
Address:
G425-427, Bldg. G, No. 40 Huaning Rd., Gangshen Invention Garden, Longhua, Shenzhen, Guangdong, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
1. Speed limiter Endurance Tests
Endurance tests on speed limiter device should be carried out as
per the following procedure and conditions specified. The device
shall work satisfactorily during the tests and shall meet the
performance requirements as given in 8.3. after the test.However,
if any breaking down of the device occurs during one of the
endurance tests, a second device can be submitted to the considered
endurance tests at the manufacturer's request. The speed limiter
device should be mounted on a test bench simulating the attitude
and movement to simulate the vehicle conditions.
Note - For speed limiting function as inbuilt feature in the engine
ECU shall be submitted to the endurance test prescribed below.
However, this may be omitted if the applicant demonstrates
resistance to those effects.Here "demonstration" means -
Declaration by manufacturer in a format (Annex A) or Submission of
relevant test reports.
2.Performance Tests on the Device as Fitted on the Vehicle
- speed limiter device as installed on specified vehicle type can be approved as per choice of supplier by either of the following methods
- The general requirements mentioned in clause 4 pertaining as fitted on the vehicle should be examined during the test
3 Product Specifications
| Color | Black | Application | free android and IOS app |
| Input Fuse | 5A | CPU | TI:MSP430F5419(100MHz) |
| Battery | Lithium battery :400mA( working time is about 3.5 hours) | Warranty | 2 years |
| Item Name | Top selling shine | Function | camera gps fleet tracker |
| Working Temperature | Anna Shi | MOQ | 5 Pieces |
| Recording and tracking |
| GPS Module | GPS chip set: SiRF Star III Frequency: L1, 1575.42 MHz Number of Channel: 20 Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s |
| General requirements |
| Input I/O | 8 I/O input/output Port 1 main power check 1 port use to check the engine ( ACC check) 1 port use to SOS 1 analog Input port( Fuel sensor) 1 Output port ( Car engine control ) 3 Extend ports ( Input/Output control by software) |
3. Speed Limiter Requirements
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
- The speed limiting device shall be so designed, constructed and assembled so as to resist vibrations, corrosion, dust, humidity, petrochemicals and aging phenomena to which it may be exposed;
- When the vehicle, running at its set speed and with the driver's
accelerator at its position of maximum travel, is subject to an
accelerating force due to a down gradient,the limiter shall control
speed by restricting the engine power to the limiter's minimum
engine power control setting; - The road speed limiting device shall be designed and constructed in such a way that it can be fitted in a place not easily accessible
- The actuation force of the controls should not have a detrimental effect on the driver's efficiency or impose fatigue on the driver;
- Speed limiter device shall have geo-fence management feature;
- Speed limiter device shall remotely communicate through telecom infrastructure
4. Safety requirement
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
- All cable or harness connectors in the speedometer circuit shall be wired and sealed. All connections shall be soldered and insulated with a flame proof insulation tape of adequate length of such a color as to blend well with the rest of the vehicle wiring;
- The speed limiter function or the Speed limiter device shall operate satisfactorily in its electromagnetic environment without unacceptable electromagnetic disturbance for any other device in the environment.
- The speed limiter device shall pre-warn the driver, by way of a high frequency buzzer, optionally flashing light signal can be used that the set speed is being reached.This warming shall occur at 5% prior to the set speed and shall continue buzzing once the set speed is achieved/ exceeded;
- When the set speed is reached, the speed limiter device shall temporarily cause the engine to lose power.Engine power shall be reinstated at a speed not less than the pre-warning switch point,which is 5% below the set speed
5. Technical Parameters:
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
| Item | Parameters |
| Overall Size | 20.0 X 9.2 X 4.5 CM |
| Host Net Weight | 0.4 KG |
| Processing chip | STC |
| Speed Limiting Zone | 20-200 Km/H |
| Speed Limiting Deviation | ±5Km/H |
| Mechanical Bearing Capacity | 400N |
| Working Voltage | 9-36 V |
| Rated Power Consumption | <0.3 W |
| Working Current | <60 mA |
6 Set Speed Limiter GPRS user name and password
Some country must be set GPRS user name and password for GPRS communication. The format of set GPRS user name and password is “user + space + GPRS user name + space + GPRS password”. For example, “user name 123456”, “user” is command, “name” is GPRS user name,“123456” is GPRS password. After send SMS, tracker will reply “Set GPRS User and Password ok . ” .
Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking
Inquiry Cart
0