Product Details
YTWL_CA100F Electrical Speed Limiter Speed Limiting 30KM/H
ES6413/2019
1. Safety Requirement
All the four samples shall be tested for performance as prescribed
in clauses below.
- All cable or harness connectors in the speedometer circuit shall be
wired and sealed. All connections shall be soldered and insulated
with a flame proof insulation tape of adequate length of such a
color as to blend well with the rest of the vehicle
wiring.. - The speed limiter function or the Speed limiter device shall
operate satisfactorily in its electromagnetic environment without
unacceptable electromagnetic disturbance for any other device in
the environment
- The speed limiter device shall pre-warn the driver, by way of a
high frequency buzzer, optionally flashing light signal can be used
that the set speed is being reached. This warming shall occur at 5%
prior to the set speed and shall continue buzzing once
the set speed is achieved/ exceeded. - When the set speed is reached, the speed limiter device shall
temporarily cause the engine to lose power.Engine power shall be
reinstated at a speed not less than the pre-warning switch
point,which is 5% below the set speed.
- A second (critical) set point should activate a retarder device
(where legislated) when this set point is reached. This set point
should be no more than 5% above the standard set point and shall,
automatically, activate the retarder to ensure that the vehicle
cannot exceed the preset limit.
2 Product Specifications
Color | Black | Application | free android and IOS app |
Input Fuse | 5A | CPU | TI:MSP430F5419(100MHz) |
Battery | Lithium battery :400mA( working time is about 3.5 hours) | Warranty | 2 years |
Item Name | Top selling shine | Function | camera gps fleet tracker |
Working Temperature | Anna Shi | MOQ | 5 Pieces |
GSM Module | GSM Module:SIM5320 Band:850/900/1800/1900/2100MHz, Tally with: GSM phase 2/2+ -Class 4 (2W @ 850/900MHz) -Class 1 (1W @ 1800/1900MHz) Max RF Output: 33.0dBm±2dBm Dynamic Input Range: -15 ~ -102dBm Receiving delicacy: Class RBER≤2%(-102dBm) Frequency Stability: > 2.5ppm Max Frequency Deviation: ±0.1ppm RMS Deviation: ≤5deg | GPS Module | GPS chip set: SiRF Star III Frequency: L1, 1575.42 MHz Number of Channel: 20 Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s |
TESTS | Five samples of speed limiter device shall be provided - four
samples for the performance and endurance test described in clause 8.3 and 8.4 and one sample as fitted on the vehicle for carrying out.the tests
prescribed in clause 8.5. In the case of add-on or on-board system
built in the vehicle, the involved system and its components should
be provided separately for the performance and endurance tests | Input I/O | 8 I/O input/output Port 1 main power check 1 port use to check the engine ( ACC check) 1 port use to SOS 1 analog Input port( Fuel sensor) 1 Output port ( Car engine control ) 3 Extend ports ( Input/Output control by software) |
3. Speed Limiter GPRS requirement
YTWL_CA100F Electrical Speed Limiter Speed Limiting 30KM/H
ES6413/2019
- GPRS Of speed limiter shall have a minimum of Multi-slot Class 8
(4Rx, 1Tx, 5slot Max.);
- GPRS Of speed limiter shall Support at minimum four coding schemes
(CS-1, CS2, CS-3 and CS-4) download speed at least speed 85.6kbps
upload speed is at least 21.4kbps;
- The speed limiter function or road speed limiter shall be
EMCcompatible or shall have Anti-Jammer mechanism;
- Speed limiter devices shall be so constructed that the vehicle may
not be accelerated by the operation of the acceleration devices,
such as the accelerator pedal, when the vehicle is running at its
set speed;
- Positioning Accuracy of GPS shall be Less than 5 meters at 20 RMS;
- GSM Frequency of the speed limiter GPS shall be based on national
telecommunication requirement.
Ethiopia Standard Electronic Speed Governor GSM GPS Vehicle Speed
Limiter
- Fixed maximum speed limiting: Set a maximum speed according to the
actual needs of vehicles. For example: if you require the vehicle
speed does not exceed 60Km/h (or other appointed speed), the
product will strictly control the vehicle speed does not exceed 60
Km/h (or other appointed speed) ;
- GPS speed data collection data collection ;
- Vehicle pulse speed ;
- Digital display controller adjustment.
4. Technical Parameters:
Ethiopia Standard Electronic Speed Governor GSM GPS Vehicle Speed
Limiter
Item | Parameters |
Overall Size | 20.0 X 9.2 X 4.5 CM |
Host Net Weight | 0.4 KG |
Processing chip | STC |
Speed Limiting Zone | 20-200 Km/H |
Speed Limiting Deviation | ±5Km/H |
Mechanical Bearing Capacity | 400N |
Working Voltage | 9-36 V |
Rated Power Consumption | <0.3 W |
Working Current | <60 mA |
5 Application Field:
- For large vehicle management and dispatching system ;
- For tour bus and passenger car management ;
- For logistics vehicle monitoring and management ;
- For tank truck monitoring and management.
- For limit the speed of vehicles
Company Profile
shenzhen CarTracker Technology Co., Ltd was founded in 2009,it is
one of the most professional manufacturers for gps tracker and
mobile DVR product.Our company is located in Shenzhen
city,Guangdong province,China.At present our GPS Tracker products
are mainly exported to Southeast Asia,Africa,South America,The
Middle East ,Europe and so on.
Our main products are Car GPS Tracker,Personal GPS Tracker,large
battery GPS Tracker and 3G mobile DVR.Every year we develop new
products to meet customer requirements.and they are certified by
CE,ROHS,FCC and 3C certification bodies.
We have a Research and Development team of more than twenty
engineers. Most of them have a master's degree and 12 engineers
have more than 8 years work experience in the GPS Industry.we also
have a group of professional sales and after sales team. they will
provide after-sales and pre-sales technical support for you.
Our factory is located in Cuishan industrial area,we have about
2000 square meters of building area and more 200 production
staff.they are mainly responsible for gps product
production,testing and quality control.our monthly output is more
20000pieces.the factory has passed ISO9001,ISO14000 Certification.
Welcome to visit our factory and we look forward to the opportunity
to cooperate.