MTK MCU Motorcycle GPS Tracker With GT06 Protocol Same As G17H ET25 ST901

Motorcycle GPS Tracker With GT06 Protocol Same As G17H ET25 ST901 GPS Tracker

TK003 Product Features And Features

1 Technical parameter :
1 ).GSM:850/900/1800/1900 Quad band
2 ).GPRS: Class12, TCP/IP
3 ).Working Voltage:9-100V DC
4 ).Working current:≈22mA (12vDC)
5 ).Working current:≈12mA (24vDC)
6 ).GPS locating time:Cold start≈38s(Open sky)
Warm start≈32s Hot start≈2s(Open sky)
7 ).GPS Precision:10m(2D RM)
8 ).Working temperature:-20℃～+70℃
9 ).Working humidity:20%～80%RH
10 ).Measurement:76(L)×26(W)×15(H)mm

2 Main components: : (V1.0)

GPS functions:
protocol: GT06 1 )support ACC ignition checking ,
G-sensor : BS250E 2 )support Relay for cutting off power/fuel
input power: 9-100V 3)built-in GPS antenna: 18*18*4 mm
power IC: SL3036H 4)built-in battery, Real time tracking.
GSM module: MT6261 5)Geo-fence, over speed alarm,
GPS module: Ublox 6) platform /APP supported

3. main functions:

3,Geo-fence setting

4,Historical route playback in 365 days

5,ACC detection

6,Remote fuel/power cut off

7,Power off alarm

8,Vibrant/shift alarm

9,Bind area supplement

10,Built in G-sensor anti-static drift

11,Bend compensation

12,Power saving mode

13. Original Vehicle low battery Alarm

Motorcycle GPS Tracker With GT06 Protocol Same As G17H ET25 ST901 GPS Tracker

4 Device status indicators
4.1 Connect DC 9-100V power supply and the red LED will light continuously.
The red LED is the power signal,
it is always on when the external DC is connected.
4.2 The blue LED is the GSM signal indicator.
It is always on when there is no GSM;
it flashes when GSM is normal;
it flashes quickly when transmitting data.
4.3 The yellow LED is the GPS signal indicator:
it is always on when there is no positioning;
it flashes after positioning.

5.Installation for SIM of device
5.1 Preparation for the installation
5.1.1 Product Check. Open the packing box and check the device‘s model and
accessories. If the model is wrong or the accessories not complete, please
contact the dealer.
5.1.2 Choose SIM card. Please insert a SIM card to the device. Please take
dealer’s advice as reference.
5.1.3 SIM card installation. Discharge the cover of the device and uncover the SIM
card holder. Then insert the SIM card and cover SIM card holder.
5.1.4 Put back the front cover and screw it up.
5.1.5 Connect the device to the 9-100Vpower supply.(the red LED constant glow)
5.1.6 Install the device in the hidden place of the car；
The SIM card must be with GPRS function and enough deposit. If your SIM card
need input PIN when power on, please cancel it.
5.2 Installation for the Car/Motorcycle/E-bike
The GPS tracker must be installed under professional personnel.
Note:
1) Please install the device in the hidden place as followings:
Under Front windshield；
In the front instrument panel；
Under back windshield；
2) Avoid being placed with signal radiators like reverse sensor ；
3) The device has GSM antenna and GPS antenna inside. Please ensure the
receiving side of the device is face up and without metal cover.
Note:The metal cover will lessen the receiving of GPS signals.

6. Device wiring requirements
6.1 The device power supply is DC 9-100V. The red line is positive pole while
the black line is negative pole.
6.2 The negative pole of power supply connects with ground or the metals.
Please do not connect with other ground lines.
6.3 When finishing the power supply wire connection, please make the plug of
power supply to the device
Any issue please contact the local distributors.

7. TK003/CA-V4 SMS command list :

Motorcycle GPS Tracker With GT06 Protocol Same As G17H ET25 ST901 GPS Tracker

Our Company:

Shenzhen Cartracker technology company was founded in 2009, Our factory located in

Cuishan industrial park of Shenzhen China,we have about 2000 square meters of building

area and more 200 production staff, a team of 25 software and hardware engineers and a 12

people super sales team, during the last 8 years rapid development, we are enter the top 10

influential GPS Tracker suppliers in China, in China, we have many cooperation with super

government projects meanwhile our products sells to a large number of customers from more

than 150 countries.

FAQ:

1. Where is your factory?

Answer: Our factory is in Shenzhen City China.

2. Do you test all your products when your product them?

Answer: Yes, of course, we test all before ship them.

3. Do it contain built-in battery for your GPS Tracker product?

Answer: Yes,this model contains one 180mAh Li-ion battery.

4. What kinds of GPS Chip you use?

Answer: we used Ulbox Chip.

Contactor Details:

whatsapp: +86-13560742132
mobilephone: +86-13560742132
Wechat:+86-13560742132
skype:bryant122122
website:www.gpstrackerlocator.com

shenzhen CarTracker Technology Co., Ltd was founded in 2009,it is one of the most professional manufacturers for gps tracker and mobile DVR product.Our company is located in Shenzhen city,Guangdong province,China.At present our GPS Tracker products are mainly exported to Southeast Asia,Africa,South America,The Middle East ,Europe and so on.

Our main products are Car GPS Tracker,Personal GPS Tracker,large battery GPS Tracker and 3G mobile DVR.Every year we develop new products to meet customer requirements.and they are certified by CE,ROHS,FCC and 3C certification bodies.

We have a Research and Development team of more than twenty engineers. Most of them have a master's degree and 12 engineers have more than 8 years work experience in the GPS Industry.we also have a group of professional sales and after sales team. they will provide after-sales and pre-sales technical support for you.

Our factory is located in Cuishan industrial area,we have about 2000 square meters of building area and more 200 production staff.they are mainly responsible for gps product production,testing and quality control.our monthly output is more 20000pieces.the factory has passed ISO9001,ISO14000 Certification.

Welcome to visit our factory and we look forward to the opportunity to cooperate.