Zion Code and Description
Zion Code: ZCM2141HXA1
Zion Description: 24F MTP SM Fiber Optic Loopback Module /Cable
The MTP loop contains the MTP back ring jumping line in the
LOOPBACK, and puts both ends of the fiber into an MTP connector to
achieve the light path in the same connector. The launch capacity
and receiving sensitivity of the device, especially in 40/100G
network communication, can locate various potential phenomena by
returning signals to achieve effective testing and evaluation of a
single coMTPnent or interface on the fiber network.
There are many configurations of optical fiber circuit, which can
accommodate 8 -core, 12 -core and 24 -core MTP connector and
several fiber fiber configurations to adapt to the port in the
test.8F MTP Fiber Loopback Module allows verification and testing
of transceivers featuring MTP interface – 40GBASE-SR4/CSR4 QSFP+
devices. 12F MTP Fiber Loopback Module allows verification and
testing of transceivers featuring MTP interface – 40GBASESR4 QSFP+
or 100GBASE-SR4 devices. 24F MTP Fiber Loopback Module allows
verification and testing of transceivers featuring MTP interface –
100GBASESR10 CXP/CFP devices.
MTP Loopback modules provides a looped signal to test the transmit
and receiving functions. It used widely within testing environment
especially within parallel optics 40 and 100G networks. Loopbacks
are built to link Transceivers (TX) and Receivers (RX) positions of
MTP transceivers interfaces. MTP loopbacks can facilitate and speed
up IL testing of optical networks segments by connecting them to
MTP trunks/patch leads.
OMC offers a line of MTP fiber optic loopback assemblies for
burn-in and testing of MTP network coMTPnents and systems. These
MTP Loopback Assemblies are used to effectively test transmitter
capability and receiver sensitivity of network equipment,
particularly for telecom and datacom requirements. They are
packaged in a compact housing for the highest density available for
these applications.
Connectors’ Industrial Standard
MTP Singlemode Reference: EIA/TIA-604-5
MTP Singlemode Housing Details: SM APC: Green connectors+black boot (Standard Loss MTP)
SM APC: Yellow connectors+black boot (Super low loss MTP)
MTP Multimode Reference: EIA/TIA-604-5
MTP Multimode Housing Details: OM1&OM2 PC: Beige connectors+black boot (Standard Loss MTP)
OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low
loss MTP)
OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss
MTP)
- Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE,
JIS C5982; TIA-604-5(FOCIS5) compliant Structured cabling per
TIA-568-C
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3
Material’s details
Optical Specifications
Item: Parameter
Fiber Type: Singlemode
Fiber Diameter: 9/125um
Insertion loss: SM(G657A1)＜1.0dB
Return loss: SM＞50dB
Insert-pull Test: Above 600 times, IL＜0.5dB
Operation Temperature: -40℃~ +80℃
Fiber Optic Loopback Testing
Typically, a loopback test is a test in which a signal is sent from
a communication device and looped back to the device as a way to
determine whether it is functioning well or as a way to
troubleshoot a defective node in the network. As for fiber optic
loopback testing, optical loopbacks are used to verify the
operational reliability of the device. Using fiber optic loopback
cable or fiber optic loopback module for data transmission, the
signal emitted by the device is looped from the transmit (Tx) end
of an active component back to the receive (Rx) end of the same
component.
Application
When it comes to practical application, fiber optic loopback test
is often employed for checking fiber optic transceivers. Since
transceiver has two ports for receiving and transmitting the light
signal, it is necessary to test the ports to see whether they are
still under operation. Thus, fiber optic loopback test is the most
convenient way for transceiver maintenance. The testing process is
by routing the laser signal from the transmitter port back to the
receiver port. Then the transmitted pattern is compared with the
received pattern to make sure they are identical and have no error.
- Collocated with 40G or 100G MPO/MPO interface transceivers
- Loopback Module can be used for testing the transmission capability
and receiver sensitivity of fiber optic network equipment.
Naming Rules&Order Confirmation Information:
Connector Fiber Channel
Polarity (Channel Alignment)
Which to Choose for a Specific Transceiver?
Considering the common features of the transceiver and the
loopback, we should think about the connector type, polish type,
and cable type when selecting a loopback for the transceiver. The
selection guide for some mostly used transceiver modules is
summarized in the following tables.
Conclusion
This post discusses specific fiber loopback choices for some most
commonly used fiber optic transceivers. For other transceiver
modules that are not mentioned in this post, we can also know how
to choose a suitable loopback for it by getting details about its
interface type, physical contact and cable type.
Zion Communication's Hot MPO Fiber Optic Loopback
- 7236013 ZCM1111HXA: 8F MPO SM Fiber Optic Loopback Module /Cable
- 7236014 ZCM1121HXA: 12F MPO SM Fiber Optic Loopback Module/Cable
- 7236015 ZCM1141HXA: 24F MPO SM Fiber Optic Loopback Module /Cable
- 7236016 ZCM1116HXA: 8F MPO OM3 Fiber Optic Loopback Module /Cable
- 7236017 ZCM1126HXA: 12F MPO OM3 Fiber Optic Loopback Module /Cable
- 7236018 ZCM1146HXA: 24F MPO OM3 Fiber Optic Loopback Module /Cable
- 7236019 ZCM1117HXA: 8F MPO OM4 Fiber Optic Loopback Module /Cable
- 7236020 ZCM1127HXA: 12F MPO OM4 Fiber Optic Loopback Module /Cable
- 723602: ZCM1147HXA: 24F MPO OM4 Fiber Optic Loopback Module /Cable
- 7236022 ZCM2111HXA: 8F MTP SM Fiber Optic Loopback Module /Cable
- 7236023 ZCM2121HXA: 12F MTP SM Fiber Optic Loopback Module /Cable
- 7236024 ZCM2141HXA: 24F MTP SM Fiber Optic Loopback Module /Cable
- 7236025 ZCM2116HXA: 8F MTP OM3 Fiber Optic Loopback Module /Cable
- 7236026 ZCM2126HXA: 12F MTP OM3 Fiber Optic Loopback Module /Cable
- 7236027 ZCM2146HXA: 24F MTP OM3 Fiber Optic Loopback Module /Cable
- 7236028 ZCM2117HXA: 8F MTP OM4 Fiber Optic Loopback Module /Cable
- 7236029 ZCM2127HXA: 12F MTP OM4 Fiber Optic Loopback Module /Cable
- 7236030 ZCM2147HXA: 24F MTP OM4 Fiber Optic Loopback Module /Cable
Packaging
This easily taken and well-protected fiber optical cable package
has been labelled and marked by OMC as default .
Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm .
Which carton to be used depends on goods Qty .
Packing can be customized.
OEM/ODM service for you
- Cable color, printing word, material of cable jacket, connector’s
color
- OEM Label, Identify ring, cable’s label,box, shipping marks
- Different quality Level.
