

Add to Cart
High Power Ultrasonic Measurement Instruments , Ultrasound Tesing Instrument
Impedance Analyzer is mainly used for piezoelectricity element impedance analysis and
parameter calculation. Before using piezoelectricity element, you
need to know its major parameters: resonance frequency Fs,
antiresonance frequency Fa, half point power F1 and F2, the max.
admittance Gmax, direct capacitance C0, dynamic resistance (R1, C1,
L1), free capacitance CT, free dielectric constant 33T,mechanical
quality factor Qm, electromechanical coupling factor Keff, plane
electromechanical coupling factor Kp and so on.
This instrument can measure admittance characteristic curve of
piezoelectricity element(the admittance is equal to reciprocal of
impedance) and analyze and extractthe above needed parameters. With
this instrument, you can gain four characteristic curves of
piezoelectricity element (admittance characteristic graph,
impedancecharacteristic graph, admittance coordinate graph,
impedance coordinate graph).
Moreover, it is easy to save and print the measured result.
Specification:
Impedance Analyzer | HS80A (Improved) |
Frequency Range | 1KHz~MKHz |
Basic Accuracy | < 1% |
Scan Speed | 5 sec/one pass (equivalent to 600 scan dots) |
Frequency Accuracy | ±10 ppm |
Phase Accuracy | 0.15 degree |
Temperature Range | 10~40 degree Celsius |
Impedance Range | 0.1Ω~1MΩ |
Frequency Step | 0.1Hz to Any |
Measure Items | Resonance Frequency: Fs |
Half Power Frequency: F1 and F2 | |
Maximum real admittance at Fs: Gmax | |
Dynamic Resistance: R1 | |
Anti resonance frequency: Fp | |
Mechanical quality factor: Qm | |
Free capacitance: CT | |
Dynamic inductance: L1 | |
Dynamic capacitance: C1 | |
Static capacitance: Co | |
electromechanical coupling coefficient: Keff and Kp | |
Maximum real impedance at Fp: Zmax | |
Measure Diagram | G,B-F |
G-B (admittance circle coordinate) | |
R,X-F | |
R-X (impedance circle coordinate) | |
Z,phase-F | |
Y,phase-F | |
Z(Logarithm),phase-F | |
Amplification | piezoelectric ceramic, ultrasonic transducer, power ultrasonic, ultrasonic weld, ultrasonic clean, ultrasonic sensor |
HS70A (Improved) Impedance Analyzer(1KHz~500KHz)Including:
|
This instrument combines the hardware and PC software for impedance
analysis. The hardware system finishes impedance measure, and the
PC software finishes impedance analysis and parameter extraction
power.
This instrument is used for guiding piezoelectricity element's
testing and using.It is a synthetic solution of piezoelectricity
element's measurement and analysis.Moreover, it can evaluate and
test parameters of the piezoelectricity element.
Impedance analyzer is widely applied in ultrasonic industries,including ultrasonic plastic welder, ultrasonic cleaner, ultrasonic transducer,ultrasonic electro machining, underwater acoustic transducer, ultrasonic sensor, piezoelectric ceramic, parking sensor, medical ultrasonic device, ultrasonic scaling device, ultrasonic horn, ultrasonic welding head, ultrasonic grinder, and ultrasonic emulsor.
Impedance analyzer is adopted to help the company make much profit,
Such as:
1) Obviously improving product quality. Because the graphics of impedance analyzer finds out whether there is unobvious bug inside ultrasonic devices, it can be applied in testing Corp's materials and instructing the production.
2) Rapid measurement speed can reduce human capital tremendously if needful to measure a lot of devices.
3) Advantageous to the Corp's standardization production and technical stabilization.
High Power Ultrasonic Measurement Instruments , Ultrasound Tesing Instrument