

Add to Cart
Optical RFID Swiping Card reader intelligent door entry pedestrian passing baffle gate access control equipment
PRODUCT PARAMETER
PRODUCT PHOTO
PRODUCT FUNCTION AND FEATURES
1. Problem-self-checking function.
2. Control board is with standard electrical interface for the integration of various access control terminal.
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the Swing barrier
and then take a valid card to be read for passing.
7. Direction display to guide passenger which direction is to go.
8. Anti-rush function: If there is no open signal, arm will be
holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and
mechanical anti-clipping. When passenger is going through the
sliding barrier, photocell will detect out this situation and will
not close. After passenger passed, arm will close automatically.
During its reposition, if arm meets any obstacle, arm will get back
automatcially or stop working for a while with very slight force.
10. Many options of working ways: Bi-direction card reading; One direction card reading and another no reading; One direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
PRODUCT DIMENSION