Product Details
Automatic access control waist high Pedestrian Swing Gate stainless
steel with fingerprint reader
Introduction:
The whole product appearance using SUS304 stainless steel plate
stamping forming, intelligent swing gate can easily compatible with
IC card, ID card, barcode card, fingerprint and other card
identification equipment, to provide a civilized, orderly way,
effective management of people in and out. Can be widely used in
the station, wharf, subway, factories, buildings, intelligent
residential, hotels, clubs, enterprises and institutions need to
realize the intelligent management of the channel.
This product is divided into: Single Movement: for single channel
and multi-channel; dual movement: for multi-channel
Features of Pedestrian Swing Gate:
- Can integrate with various types of access control system.
- Trigger to open by dry contact. Automatic close back after auto
timer elapsed. Delay time can be programmed on swing barrier
control panel.
- Trigger to open by dry contact (NC) and close by dry contact (NO).
This allowed access control reader to control swing barrier opening
and closing time.
- Support bi-directional opening
- During power failure, swing barrier will automatically open up to
allow free access. When power resume, swing barrier will
automatically close back to resume security level.
- Built in clutch that will automatically disengage motor drive from
gearbox when the gate is obstructed. Clutch release reduce impact
force to minimum in the event that gate closed onto passing users.
This also protect the motor and control panel from being damaged
due to overload.
- Optional safety IR beam can be added to auto reverse the gate upon
detecting obstacle in the passage way. This way the gate is
reversed before even hitting user that is still in the passage way.
More safety to the user.
- Gate length can be easily customized to fit site requirement.
- Auto synchronized opening when 2 swing barriers are installed for
the same passage. Both side will open and close at the same time.
- Gate motor mechanism is self lock at open and close position.
Specifications of Pedestrian Swing Gate:
Arm material | Acrylic or stainless steel |
Housing material | 304 or 316 stainless steel |
Housing Dimensions | L1200 x W280 x H980mm |
Arm length | 530mm(Standard),Max:750mm |
Net Weight | 80kg |
Motor voltage | DC24V |
Power Voltage | AC220V±10%/ AC110V±10% |
Frenquency | 50Hz/60Hz |
MCBF | 5 million cycles |
Transit speed | Max:30 persons/min |
Operating environment | Indoor/outdoor (Shelter) |
Operating temperature | -20°C ~ 60°C |
Operating humidity | ≤95% no condensation |
Worshop: