Plain Weave Carbon Fiber Plate Standard Modulus Satin 48" x 24" x 1/8"

Plain Weave Carbon Fiber Plate - Standard Modulus - Satin - 48" x 24" x 1/8"

Plate - Carbon Fiber - Plain Weave - Satin - 24" (609mm) x 48" (1219mm) x 0.125" (3.2mm)

These press-molded plates are manufactured using remnant prepregs collected from the commercial aviation manufacturing industry. Rather than discarding these remnants in landfills, the materials used to manufacture these advanced composite plates are made of the highest quality materials. The remnants are too small for the aerospace application they were purchased for but large enough to make high-quality, high-grade carbon fiber plates in various sizes and thicknesses. The result is a cost-effective, high-performance, and more environmentally friendly solution for plate manufacturing.

Carbon fiber is an advanced material that has gained widespread popularity due to its strength and lightweight properties. This high-tech material is used in various industries, including aerospace, motorsports, and construction. There are two forms of carbon fiber used in the manufacturing process: carbon fiber sheets and carbon fiber plates. Both have their advantages and disadvantages, and it is important to understand the differences between them before making a purchasing decision.

Carbon Fiber Sheets

A carbon fiber sheet is a flat piece of carbon fiber composite material. They are usually made from woven carbon fiber fabric that has been impregnated with a resin, such as epoxy, to form a rigid and strong composite. It can be cut and drilled to suit a variety of applications, making them highly versatile.

Applications

CF sheets and plates have a wide range of applications due to their strength and lightweight properties. Some of the most common applications are:

• Aerospace: Carbon fiber is used in the manufacture of aircraft components, including fuselage panels, wing skins, and engine nacelles.
• Motorsports: Carbon fiber is used in the manufacture of high-performance racing vehicles, including chassis, body panels, and suspension components.
• Construction: Carbon fiber is used in the reinforcement of concrete structures, such as bridges and building foundations, to increase their strength and durability.
• Sporting goods: Carbon fiber is used in the manufacture of high-performance sports equipment, including golf clubs, fishing rods, and bicycle frames.

Carbon Fiber Sheet Plate Specification:

In conclusion, carbon fiber sheets and plates are versatile composite materials that have a wide range of applications due to their strength and lightweight properties. CF sheets are flat pieces of composite material, typically made from woven carbon fiber fabric and resin. CF plates are thick and rigid pieces of composite material, made from multiple layers of carbon fiber fabric and resin. It is important to understand the differences between the two forms of carbon fiber and their applications, to make an informed purchasing decision. Whether you choose CF sheets or plates, you can be confident that you are getting a high-quality, high-performance composite material that will provide many benefits over traditional materials.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.