500mm 19.6 Inches Carbon Fiber Tubes Glossy Surface 3K Roll Wrapped 100% Pure

500mm (19.6 inches) Carbon Fiber Tubes Glossy Surface 3K Roll Wrapped 100% Pure

LIJIN carbon fiber tubes contain 100% carbon fiber imported from Japan. The surface is plain weave, glossy surface/ twill weave, and matte finishes without any glass fiber contents. High stiffness, high tensile strength, low weight, high chemical resistance, high-temperature tolerance, and low thermal expansion are also proof of LIJIN carbon fiber tubes. In the past few years, our carbon fiber tubes have been trusted and supported by many customers.

Product Description:

• Item Name: Full Carbon Fiber Tubes
• Dimension: 500MM in length / 420MM in length / 300MM in length, etc.
• Inner Diameter x Outer Diameter: 4X6MM 6X8MM 8X10MM 10X12MM 12X14MM 14X16MM 16x18MM 18x20MM 20X22MM 22X25MM 23X25MM 24X26MM 25X27MM 28X30MM 30X32MM 37X40MM, etc.
• Surface: 3K, Plain Weave, Glossy Surface/ Twill Weave, Matte Finish
• Features: Strength and Light Weight

Product Advantages:

1. High-Quality Carbon Fibers Material

The carbon fiber material we use is resin-impregnated woven cloth that is commonly referred to as “pre-preg.” It is made with high-quality carbon fibers combined with space industry-defined resin systems.

2. Beautiful and Quality Tubes

We use heated compression molding to cure the pre-preg material into round tubes.

3. Features

• High strength and stiffness with low weight
• Excellent fatigue resistance
• Dimensional stability: Low to Zero CTE (Coefficient of Thermal Expansion)

4. Widely Application

LIJIN offers a wide range of carbon fiber tubes for many different applications. Carbon fiber tubes are used in numerous applications like tactical ladders, trusses, beams, and more.

Our Service:

1. It ensures a year of quality assurance and 24-hour online customer service.
2. Protection of your sales area, ideas of design, and all your private information.
3. Request for samples is accepted.
4. Drilling and slotting are accepted.
5. We guarantee the products to be manufactured with the finest materials and mature technics.
All tubes can be repaired at no charge if returned to us, postage prepaid, within one year.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.