Industrial 1mm Carbon Fiber Sheet 3K Twill Weave 400*500mm

Industrial & Scientific Standard 1mm, 2mm, 3mm Carbon Fiber Sheet Plate

Carbon fibre sheet manufactured using 100% high strength carbon fibre reinforcement cured under pressure and temperature to produce a high-performance sheet suitable for fully structural applications whilst also having a class-A (cosmetic) finish on one side.

The visible surface of the sheet uses a ‘visual quality’ 2/2 twill, 3k woven carbon fibre fabric and has a high-gloss finish. The reverse side of the sheet is finished with a flat but textured ‘peel-ply’ finish suitable for secondary bonding.

Our High Strength Carbon Fibre Sheets are manufactured in-house by LIJIN using a strictly controlled process to produce the highest standard of carbon fibre sheet available.

Immediately after curing and before cutting or stocking the sheets are coated in a high-quality protective film on their cosmetic side to ensure they remain in pristine condition.

These high quality carbon fiber sheets come in various sizes, made from 100%, 3K plain weave, carbon fiber and finished with a matt surface on both sides. Unlike many low cost carbon sheets that are made by pressing two outer skins of carbon fibre over a carbon and resin core, these plates are made with layered sheets of carbon fibre and resin, making them the same strength all the way through.

Whether you're making your own drone frames, car chassis, firewalls, bulkheads or any other custom designs that require high strength, lightweight material, these quality carbon fiber sheets are more than up to the task.

Typical Uses

• Motorsport / marine / light aircraft
• Engineering / automation
• Displays / exhibitions / shop-fitting
• Cabinets / enclosures / high-end audio
• Further processing into sandwich panels

Advantages

• 100% high strength carbon fibre reinforcement throughout
• Pin-hole free high-gloss cosmetic surface
• Flat, textured bonding surface on the reverse
• Wide range of thicknesses and sheet sizes is available

How to Buy

Our High Strength Carbon Fibre Sheet is available to buy in thicknesses of 1mm, 2mm, and 3mm. Choose your required thickness at the top of the page.

The sheet is also available in sheet sizes 250mm x 225mm, 450mm x 250mm, 500mm x 450mm, 950mm x 500mm, 1000mm x 950mm and 2000mm x 950mm which should also be selected at the top of the page.

We also list separately a 0.25m Carbon Fibre Veneer suitable for furniture making, laminating, car trim pieces, etc., which is available with or without self-adhesive backing.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.