Support Steel / Aluminium / Carbon Fiber CNC Service High Speed Millers

Motor Mount for Multicopters 3.0mm Carbon Fiber CNC Service High Speed Millers .

Main processing method

※ Carbon fiber CNC Service composite material hardness, when drilling bit wear quickly.

※ Carbon fiber composite material thermal conductivity is poor, in the process of drilling bit and

composit materials to produce large amounts of friction heat and carbon fiber composite

material thermal conductivity is small, the heat is difficult to eliminate the cutting area in processing

temperature rising rapidly, causing bit annealing, accelerating bit wear.

※ Carbon fiber composite materials have shrinkage phenomenon, this is due to the small thermal

conductivity of carbon fiber composites, and the linear expansion coefficient and elastic

recovery were larger.

Specification

The main characteristic

1. The loading effect is good, the grade of high-grade, more than any other material loading after more

beautiful!Deeply domestic and foreign friends like it!

2. The advantages, more light and bright, easy cleaning, thin shell and good toughness.

3. Do not need to spray paint, after the supplier, can be directly loading!

4. The surface of carbon fiber are gel, it possesses the advantages of not easy to clean water, rain

water has the function of the automatic cleaning.

FAQ

Q:

How long is delivery time?
A: The sample takes 1-3 days, mass production needs 10 to 15 days, is ultimately based on orders, offline

will negotiate with you.

Q:

Can I order the next samples first?
A:

Can we welcome to order samples for testing and check the quality of the mixed sample is acceptable.

Q:

Can you accept different mixed batch of products?
A:

Yes, we are wholesale support for different products, there is no limit to the raw materials and

mechanical parts (including color specifications, etc.).

Q:

If I have a lot of products to export, can you improve the wooden cases or container?

A:

Yes, we can provide A set of wooden packaging products, but only in large Numbers.

***Pictures shown below are only to display the carbon fiber CNC capability,experience and Quality from LijinCarbon.
LijnCarbon will NOT disclose or share any drawings or product detail to third parties.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.