MMO Coated Titanium Wire Anode For Deep Vertical Groundbeds Tanks Pipelines

MMO Coated Titanium wire anode for deep vertical groundbeds tanks pipelines

The flexible anode is also known as the polymer cable anode. The polymer cable anode is made of conductive and stable modified polymer. Graphite powder is used as the conductive material, and the copper cable core is used as the current wire to make the cable. The anode has good flexibility, strong resistance to mechanical damage and good chemical stability. The outer diameter of the cable is 12.7mm, and the cross-sectional area of the internal copper core wire is 11.4mm2. Therefore, the resistance R' per unit length is 2mΩ.m-1, and the flexible anode is mainly Cathodic protection for buried pipes and tank bottoms. The original intention of the development is to solve the serious aging of the buried pipeline anti-corrosion layer, and the cathodic protection current is significantly increased. It has been proved that the application of the flexible anode successfully solves the problem of the old pipeline cathodic protection, and can also generally solve some traditional cathodic protection technologies. Difficulties, such as interference with external structures, problems with cathodic protection in high-resistivity environmental media, and cathodic protection current distribution at the bottom of the tank. Generally, a flexible anode generally has the following components: a copper core, a conductive polymer anode material, coke slag, a braid, and the like.

Advantages :

Even distributed potential and current;

Construction Conveniently;

Less current loss;

More efficiency ;

Easy to bury anode bed;

No impact when rebuild the cathodic protection;

No more “interference, shield”problem;

Easy design and install.

MMO linear anodes, also known as flexible anodes, are an ideal product for use when a low-current, evenly distributed cathodic protection system is needed. The core of the anode is composed of high-grade, titanium wire with a Ir–Ta mixed metal oxide catalyst coating. The titanium wire is prepackaged in a porous, non-woven fabric “sock” that contains high conductivity calcined petroleum coke breeze —— enhancing the anodes abrasion and damage resistance.

The power cable attached is #10/#16 AWG stranded copper with either high molecular weight polyethylene (HMWPE) insulation or a dual insulation of Kynar/HMWPE. This cable has the capacity to maintain the required current over considerable distance without incurring substantial longitudinal voltage drop.

The MMO linear anode has the advantage of easy installation and handling as well being cost efficient. Typical uses for this anode include the impressed current cathodic protection of in-plant piping, buried oil (gas) pipelines, petrochemical container, tank bottoms and other underground structures.

Other Products you may have interests:

Aluminum Anodes for Hull, Pier,Piling,Deck

Zinc anodes for Ship, Marine

Zinc Ribbon anodes

Water Heater Anodes

High Silicon Cast Iron Anodes

Magnesium Anodes for Underground Pipelines, Storage Tanks

Contact me for more details:

Vivian Jiang

-----------------------------------------------

China Hunan High Broad New Material Co.Ltd.

70 Chezhan North Road,Changsha, China 410100

Tel:+86-731-85717705 Fax:+86-731-85716569

Mobile/Whatsapp: +86-139-7488-3816

Email: vivian@hbnewmaterial.com

Skype: vivian.jjy

China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support.

Our sales office located in Changsha, Hunan province, plant located in Hunan,Shanxi, Henan,Guizhou province.Our business scope including : Cathodic protection products for fresh water and marine anti-corrosion products such as magnesium anodes,Aluminum anodes ,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy , Magnesium investment castings industry; Magnesium alloy profile :Extrusion/hot rolled billet, plates,bars etc .for various civil & military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high wear-resistance & hardness ceramic products for sandblasting nozzle & bulletproof plate for armor vest, armor vehicle.

Along with strong economic development in China, we expand our business very well, Product capacity is over 5000mt per year.Turnover reach to USD20,000,000.00 per year.

Our Products are widely accepted and recognized by clients worldwide including Europe, North America, East Asia, Middle east etc..

Our R&D department have strong technical design capacity. We closely cooperated with colleges and universities, supply the service for various companies in China and overseas.

Believe we can be your long term and reliable supplier .