Add to Cart
Brushed Gold Color Anodized Aluminum Angle Profiles for Decoration
Material
1, pure whiteness popular aluminum round pipe with best price
1. Aluminum extrusion profile
2. Aluminum alloy: 6000 series
3. All kinds of surface treatment, such as milling finish, powder
coated, anodizing finish of all colors
4. Guaranteed quality and good price
5. Good surface finish, no burr or dirt
2, Material:
Chemical Composition | 6063 T5 | ||||||||
Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | total others |
0.2-0.6 | M.0.35 | M. 0.1 | M. 0.1 | 0.45-0.9 | M. 0.1 | M. 0.1 | M. 0.1 | M. 0.05 | 0.15 |
Mechanical property | |||||||||
Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
110Mpa | 160Mpa | 8% | 8 HW |
3, Aluminium profiles(classifcation according to surface treatment
requirements)
1. Anodizing profiles
2. Electrophresis profiles
3. Powder coating profiles
4. Wood finish profiles
5. Polished profiles
6. PVDF coating profiles
4, Manufacture technological process:
Chief manufacture technological process:
aluminium ingot & alloy→melting and casting→extrusion→powder coating→pouring rubber for heat insulation→checkout→packing→PVDF coatinganodizingelectrophoresis→put in products warehouse.
Our factory can do these raw material Alloy No: 6061,6063,6060.
Aluminium Alloy Composition:
Chemical Composition | 6063 T5 | ||||||||
Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | total others |
0.2-0.6 | M.0.35 | M. 0.1 | M. 0.1 | 0.45-0.9 | M. 0.1 | M. 0.1 | M. 0.1 | M. 0.05 | 0.15 |
Mechanical property | |||||||||
Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
110Mpa | 160Mpa | 8% | 8 HW |
Chemical Composition | 6063 T6 | ||||||||
Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | total others |
0.2-0.6 | M.0.35 | M. 0.1 | M. 0.1 | 0.45-0.9 | M. 0.1 | M. 0.1 | M. 0.1 | M. 0.05 | 0.15 |
Mechanical property | |||||||||
Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
180Mpa | 205Mpa | 8% |
1. Prices fob:
Need receive your draws and need surface treatment.
2. Payment terms:
30% advance payment and balance payment before the goods load into
the container.
3. Handing time:
normally extrusion workshop 12hours and other workshop 9hours.
4. MOQ:
any small order quantity always best welcome.
but normally the cost for 1x40'or1x20'container order quantity are
lowest cost. 40' about 20-26tons and 20'about 8-12tons.
normally if one set tooling die mould finish 3-5tons then no any
die mould charge. but no problem. we will also return back the die
mould money after the order quantity finish 3-5tons in 1 year.
normally one set die mould finish 300kgs then no any added machine
cost.
Do not worry about that you can feel freely choose and confirm you
need order quantity. anyway I will try my best supply you lowest
prices.
5. Delivery time:
normally produce new die mould and sample about need 15days.
1x20'or 40'container order quantity about need 15-30days.
but we will try our best to supply you according to your need
times.