Straw Particle Board Production Line / Laminating Making Machine Free Standing Type

1. Product Introduction

straw board machine mainly produce different kinds of sheets, which can be used for ceiling, wall skirting, decorating of indoor walls and lining panels for furniture. Also can replace three-ply sheet, five-ply sheet, flakesheet, MDF (Medium Density Fibersheet ) and Gypsum Sheets.

2. Raw material and cost analysis

The wheat straw board is made of filling materials, such as sawdust and all kinds of crushed plant straw (you can select any one kind ) and several chemical raw materials which are token as modified material after special technology. The board has such features: quickly hard, high strength, large format, fireproofing, dampproof and good waterproof performance. It can be nailed, planed and sticked. The machine can be adjusted arbitrarily, and then produce the board with the thickness of 2-60mm, the biggest width of 1, 300mm and unlimited length. So you can adjust the thickness of board at will.

Take 1200mm*2400mm*8mm Glass magnesium board an example in china.

3. Technology features

There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding

under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste

materials and waste gas during its production processing. The finished board

don’t need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.

4. Equipment Model and Product Specification

1. rice straw/rice hust material
2. new economic board
3. 1220x2440mm size
4. thickness 5-25mm

straw Board can be used for ceiling, wall skirting, decorating of

indoor wall and lining board for furniture.It can replace three-ply

board, five-ply board, flakeboard, MDF (Medium Density Fiberboard )

and Gypsum Board.

5. After-sale

After purchased the equipment, we will teach relevant technology for free, and

will go to your factory for installation and testing until you can produce the

qualified product by yourself. Our company will train 2-3 technical personnel

for free until he can get the skill. We will take responsibility for provide technical consultation and following-up service for a long time, the equipment warranty

period is one year.