small business waterproof mgo wall panel forming making machine
production equipment price
Specifications of Wall Panel Machine
The equipment has high automatization degree, simple production
technology, low labor intensity and production line, and there is no noise
and three-wastes during production.
TECHNICAL INDICATORS |
Inspection items | Standard requirement (thickness 8mm)
| nspection results |
Flexural strength | >8.0 | 10.3 |
Impact strength | >1.5 | 4.84 |
performance density | 0.7<p<1.0 | 0.92 |
Back to halogen resistance | No water, no get damp | No water, no get damp |
Dry shrinkage | <0.3 | 0.21 |
Wet bilge rate | <0.6 | 0.40 |
With screw force | >15 | 61 |
The chloride ion content | <10 | 2.96 |
The factory of moisture content | <8 | 7.5 |
| The average temperature in the furnace | <50 | 8 |
The average combustion duration | <20 | 0 |
The average | <50 | 47.5 |
Wall Panel Features
1. Fast and easy operation:
It can be installed by board or combination with the dry method,
and the product can be nailed, cut, planed, drilled and sticked.
2. Low cost:
The product is filling of agricultural and industrial wastes, so
the production charge is low. With the low load of girder and short
construction period, it can reduce over 20% of engineering cost
after compared with solid brick and hollow brick.
3. Energy-saving and environmental friendly:
The producing processing need no high temperature and high
pressure. Being a green environmental-protection energy-saving
building materials, the product has no toxicity, harm, pollution
and radioactivity.
4. Increasing the usage area:
Under the same condition of heat-preserving and sound insulation,
with the thinner plate, the product can increase over 10% usage
area after compared with the same building materials.
Technology Features
Fireproof ,waterproof,environment protection and no toxicity .at
the same
time it is resistant against acid,alkali and aging. This product
can be
nailed,planed ,sawed and sticked.in the view of that its
fireproofing grade is
A .so our product will not be combustible when the fire is
800-1000C.at the
same time when our product is fell to the water for a week ,there
are not the
following phenomenon such as chalking,deformation and warp.in light
of
there is not glue in the raw materials.so there is not formaldhyde
and
benzenz for our boards .
Oxygenic index % | >90 |
Level combustion | SO |
Vertical combustion | SO |
Water content rate | 10.9% |
Capacity | 1.15g/cm3 |
Static bending intentsity | 169.46Mpa |
Density | T/m3 1.13 |
Our Factory
Shandong Chuangxin Building Materials Machinery Co., Ltd., as a new
and high technology enterprise registered at provincial industrial and
commercial department and a modern group enterprise integrated with
scientific research, processing and trade mainly focus on research,
development and popularization of decorating technique, building materials
technology and machinery. Its many patent products were sold throughout
China and some were exported to Russia, Southeast Asia, Hong Kong and
Taiwan. We have had rich assets and intellectual property rights after many
years, and in July 2004, our products were awarded as many laurels such as
State Key New Product by State Ministry of Science and Technology,
Ministry of Commerce, General Administration of Quality Supervision,
Inspection and Quarantine and State Environmental Protection Administration. With this company got much economic benefit and social
benefit, so it enjoys high popularity and good credit in the
society.
Contact Us:
whatsapp: +86 18668917597
skype: +86 18668917597
email address: mgomachinery@hotmail.com