24GHz FMCW Occupancy Detectors DALI Compact With PUSH Terminal And 5 Years Warranty
Brand Name:Merrytek
Certification:CE
Model Number:MSA063 99
Minimum Order Quantity:100pcs
Delivery Time:1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Supplier`s last login times:
within 33 hours
Product Details
Company Profile
Product Details
24GHz FMCW Occupancy Detectors DALI Compact with PUSH terminal and
5 years warranty
1. Features
1) Exclusive Merrytek Lifebeing Presence Detection
2) FMCW modulation technology applied to detect micro movement
brought by breathing
3) Germany RF technology applied for a 5-year guarantee assurance
4) DALI Broadcast control and dimming available
5) PUSH button on/off or dimming control available
6) Flush mounting, EU 86 Box, and surface mounting are available
7) 5 years warranty period
2. Parameters
| Input/Output | Input voltage | 100-240V AC 50-60Hz |
| Rated voltage | 220V AC | |
| Working current | 50mA max | |
| Consumption | ≤1W 230V DC | |
| Max surge | 1KV(L/N,EN61000-4-5) | |
| Output signal | DALI+PUSH DALI terminal:DA+ DA-(Max wire length 300m,Max terminal current 100mA) PUSH terminal: manual dimming+on/off control (Max wire length 15m) | |
| Sensor Parameter | Radar frequency | 24GHz-24.25GHz ISM band |
| Transmitting Power | 5mW Max | |
| Detection Area | Remote/Dip setting: 0-4m | |
| Hold Time | Remote/Dip setting: 10s-30min Remark: presence detection will be available only when hold time be set >30s | |
| Standby Time | Remote/Dip setting: 10s-30min | |
| QS1+100% detection range radius | major/minor/micro movement(3m height installation): 3.5±0.5m(based on 41㎡ open area test and might change due to different space) | |
| Daylight sensor | 50lux/Disable | |
| PUSH control | Push dimming range: 10%-100%,once you use push button to turn off light,there’ll be 10s block time when sensor’ll be disabled | |
| Sensitivity | High/Medium/Low | |
| Remote control | Available | |
| Daylight harvesting | Available(when daylight harvesting mode is enabled,its dimming range is 10%-100%,and our sensor will automatically be disabled when environment lux is higher than 1000lux and recover enabled when environment lower than 120lux | |
| Mounting height | 2.5-4.0m typical value:3m | |
3dB beam angle | 100°(XZ) | |
| 100°(YZ) | ||
| Application Environment | Drill hole | Φ55mm |
| Working temperature | 0℃...+50℃ | |
| Storage temperature | -40℃~+80℃ | |
| Warranty | 5 years(available due to product quality problem under indoor application) | |
| Certificate Standard | Certificate | Compliant to CE |
| Environmental requirements | Compliant to RoHS | |
| IP rating | IP20(flush mounting) IP54(surface mounting) | |
| “N/A” means not available | ||
3. Dimension
Flush mounted:
Surface Mounted
4. Wiring Diagram
5. Detection radiation
6. Detection Signal
The product detects human moving, minor moving, and presence signals, and realizes the detection of human-existing/no-human in non-sleep state. The following is a description of the moving, minor moving and presence signals:
l Major movement: detect the human significant moving (walking) in the detection area.
l Minor movement: detect the human slight movement in the detection area, such as leaning forward, leaning forward and back, swinging limbs, shaking head, typing, playing with mobile phones, and so on.
l Micro movement: detect human abdominal and thoracic expansion behaviors caused by breathing but do not detect moving signals or minor moving signals.
7. Function
The built-in light sensor can automatically detects the intensity of natural light to adjust the artificial light according to the preset lux level, to maintain target illumination. It can be used in offices, airports, shopping malls and other occasions where the brightness of lamps needs to be adjusted according to sunlight during the day
Note: you shall long press MH10 remote’s “DH mode” button more than 3s to start this function,when the load fixtures flash once means the function is enabled successfully.After that you shall press “DIM+”/ ”DIM-” button to set target lux level.When the setting is successful, when the external natural light becomes dark (brighter), the sensor will increase (lower) the brightness of the lamp to maintain preset target lux level(this status is short in “With DH” in following).
Long press “Override DH” 3s on remote control to override daylight harvesting function,load fixtures flash once means the function is disabled successfully.
ON/OFF Function with Daylight harvesting mode (stand-by period be set to “0s”, with DH mode)
2-step dimming with daylight harvesting mode (stand-by period be set to “+∞”, with DH mode)
3-step dimming with daylight harvesting mode (stand-by period be set to “1min/3min/10min/30min”, with DH mode)
8. DIP SWITCH SETTING
Detection Area
| 1 | 2 | 3 | ||
| Ⅰ | ON | ON | ON | 4m |
| Ⅱ | - | ON | ON | 3.5m |
| Ⅲ | ON | - | ON | 3m |
| Ⅳ | - | - | ON | 2.5m |
| Ⅴ | ON | ON | - | 2m |
| Ⅵ | - | ON | - | 1.5m |
| Ⅶ | ON | - | - | 1m |
| Ⅷ | - | - | - | 0.5m |
Hold Time
| 4 | 5 | 6 | ||
| Ⅰ | ON | ON | ON | 10S |
| Ⅱ | - | ON | ON | 30S |
| Ⅲ | ON | - | ON | 1min |
| Ⅳ | - | - | ON | 3min |
| Ⅴ | ON | ON | - | 5min |
| Ⅵ | - | - | - | 20min |
Standby time
| 7 | 8 | ||
| Ⅰ | ON | ON | 0S |
| Ⅱ | - | ON | 1min |
| Ⅲ | ON | - | 5min |
| Ⅳ | - | - | ∞ |
Standby DIM Level
| 9 | ||
| Ⅰ | ON | 30% |
| Ⅱ | - | 50% |
Daylight sensor threshold
| 10 | ||
| Ⅰ | ON | 50Lux |
| Ⅱ | - | Disable |
Remark: when the daylight sensor is disable, the light will turn on once motion is detected regardless of the environment lux.
For more information, please get in touch with our sales rep. for more details.
24GHz FMCW Occupancy Detectors DALI Compact With PUSH Terminal And 5 Years Warranty
Inquiry Cart
0