

Add to Cart
24GHz FMCW mmWave radar sensors standalone microwave presence
detectors
*Exclusive Merrytek Lifebeing Presence Detection
*FMCW modulation technology applied to detect micro movement
brought by breathing
*Germany RF technology applied for 5-year gurantee assurance
*Accurate Presence/Absence detection
*Daylight Sensor Available
*Round radiation. Effectively managing a whole space by a single
sensor
*Sensor parameter adjustable by DIP switch or MH10 remote
1. Parameters
Input/Output | Input voltage | 100-240V AC 50-60Hz |
Rated voltage | 220V AC | |
Consumption | ≤1W 230V DC | |
Output signal | 1 channel ON/OFF(Max 800w resistive loading and 400w inductive loading) | |
Max surge current | 50A | |
Sensor Parameter | Radar frequency | 24GHz-24.25GHz ISM band |
Transmitting Power | 5mW Max | |
Detection Area | DIP or MH10 remote setting: 0.5m-4m | |
Hold Time | Dip setting:10s /30s /1min / 3min /5min /20min | |
QS1+100% detection range radius | major/minor/micor movement(3m height installation): 3.5±0.5m(based on 41㎡ open area test and might change due to different space) | |
Daylight sensor threshold | Dip setting: 5Lux /50Lux /150Lux/Disable | |
Remote control | Available | |
Mounting height | 2.5-4.0m typical value:3m | |
Detecting Angle | 120° | |
Application Environment | Drill hole | Φ65-70mm |
Installation | Surface mounting | |
Working Temperature | 0℃...+50℃ | |
Storage Temperature | -25℃~+80℃ | |
Certificate Standard | Certificate | CE/RED |
Environmental Requirement | Compliant to RoHS | |
IP Rating | IP20 | |
Guarantee | 5 year(only for product quality problem) | |
Note: "N/A" means not available. |
2. Product Function
The product detects human moving, minor moving, and presence
signals, and realizes the detection of human-existing/no-human in
non-sleep state. The following is a description of the moving,
minor moving, and presence signals:
3. Dimension
4. Wiring Diagram
5. Structure
6. Start Process & Initialization
When powered on, the sensor indicator will turn off after flashing
for 10S and will enter a 20S detection cycle, if there’s a presence
detected,then the sensor will report the presence and enter hold
time calculating, if the absence is detected, then the sensor will
report an absence. During initialization, the sensor will not
detect moving signals and you can use our MH10 remote or DIP switch
to adjust the detection area,hold time daylight sensor, etc
parameters.
7. Detection Radiation
8. Factory settings
Detection Area: 4M Hold Time: 30S Indicator light:Open Daylight
sensor:Disable
9. DIP Switch Setting
Detection Area:
1 | 2 | 3 | |
4m | ON | ON | ON |
3.5m | - | ON | ON |
3m | ON | - | ON |
2.5m | - | - | ON |
2m | ON | ON | - |
1.5m | - | ON | - |
1m | ON | - | - |
0.5m | - | - | - |
Hold time:
4 | 5 | 6 | ||
Ⅰ | ON | ON | ON | 10S |
Ⅱ | ON | - | ON | 30S |
Ⅲ | ON | ON | - | 1min |
Ⅳ | - | ON | ON | 3min |
Ⅴ | - | - | ON | 5min |
Ⅵ | - | - | - | 20min |
Daylight Sensor:
7 | 8 | ||
Ⅰ | ON | ON | 5Lux |
Ⅱ | - | ON | 50Lux |
III | ON | - | 150Lux |
Ⅳ | - | - | Disable |
10. Remote Control (For remote control setting, please check the
spec. for your reference)