On-demand Lighting Control KNX Motion Detectors Pir Movement Sensor Switch For Smart Building Control

Brand Name:Merrytek
Certification:CE
Model Number:MSA017K IR
Minimum Order Quantity:100pcs
Delivery Time:1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Payment Terms:T/T
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Supplier`s last login times: within 33 hours
Product Details Company Profile
Product Details

On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control


1. Features

1) PIR motion detection
2) KNX bus power and KNX communication available
3) Daylight sensor detection is available
4) Detection area, and hold time can be set by remote or ETS
5) Max detection range: 2.5-8m in diameter
6) Warehouse, workshop, and lobby motion detection is highly recommended

7) Flush mounting or surface mounting optional


2. Parameters

Input/OutputInput voltage21-30V DC KNX bus power
KNX current≤10mA
Consumption≤0.5W @24V DC
Sensor parameterFunctionPIR motion detection+ daylight sensor
Detection AreaETS setting:8%/16%/24%/32%/40%/48%/56%/64%/72%/80%/88%/100%
Hold TimeETS setting
Radius detection range(based on 100% sensitivity)2.5-4m @25℃ based on 3m mounting height
Remote controlAvailable
Mounting height2-6m typical value:3m
Application environmentDrill holeΦ60mm
Working temperature-25℃...+50℃(detection range might differ based on different temperature )
Storage temperature-40℃~+80℃
Warranty3 years(available based on product quality problem)
Certificate StandardCertificateCompliant to CE
Environmental requirementsCompliant to RoHS
IP ratingIP20
“N/A” means not available

3. Dimension

4. Wiring Diagram



Wiring recommendations:

1. KNX bus wiring suggestion hand in hand to the end, star, or tree wiring is not recommended to ensure the stability of signal transmission.


2. KNX bus wiring wire recommends KNX standard EIB shielded wire or Category 6 network cable, the length of the bus wiring is recommended not to exceed 400 meters, and the number of sensor connected to a bus is recommended to not exceed 12.


3. The number of sensors connected to a bus needs to fully consider the current load capacity of the power supply: that is the sum of the currents of all KNX devices (including sensors) shall not be greater than the load current of the KNX power supply.


5. Start Process & Initialization

After routing the physical addresses and setting the channel parameters, follow these steps:

(1) Connect Bus interface;

(2) Set Bus and auxiliary power on (note: please make sure that product has auxiliary power supply, otherwise the device may not work properly);

(3) Press the programming switch of the product, the LED light will turn red;

(4) Use the bus interface to download the physical address through the ETS software. The programming LED light is off to indicate that the physical address download is successfully completed;

(5) Download the application after setting the required application parameters.

(6) After downloading the application, the product goes into initialization. During initialization, the detection function is disabled. After 20S, the initialization is completed, and the product works normally;

Note: Please use the latest version of ETS 5 or 5.7.2 version. Please obtain thee ETS engineering configuration file of this sensor from our sales staff.


6. Detection radiation

7. Detection Signal

The product detects human moving signals and below is a description of the moving signals:

Moving signal: detect the human significant moving (walking) in the detection area.


8. Remote Control (MH10)


China On-demand Lighting Control KNX Motion Detectors Pir Movement Sensor Switch For Smart Building Control supplier

On-demand Lighting Control KNX Motion Detectors Pir Movement Sensor Switch For Smart Building Control

Inquiry Cart 0