Operating Frequency 5.8 GHz ±75MHz IP20 Dimmable Motion Sensor for LED Batten
Brand Name:Merrytek
Certification:CE, RED, UKCA, SAA, CB
Model Number:MC077V 99
Minimum Order Quantity:100PCS
Delivery Time:1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Supplier`s last login times:
within 33 hours
Product Details
Company Profile
Product Details
MC077V 99 AC ON/OFF Sensor
【Product Feature】
1. Patented mini dipole microwave antenna for tri-proof light and
ceiling light,suitable to built-in metal LED tray without false
trigger.
2. Compact size, not effect light distribution.
3. Low sidelobe, no false trigger in metal reflection space.
4. Low transmitting power, no harm to human.
5. Sensor data can be set by DIP switch & remote control.
6. Not affected by temperature, humidity, noise, dust etc.
【Function】
| √ON-OFF function | Stand-by Period be set “0s” | |
| √2-step dimming | Stand-by Period be set “+∞” | |
| √3-step dimming | Stand-by Period be set “10s/1min/3min/5min/10min/30min” | |
| ○Override function | N/A | |
| ○Daylight harvesting | N/A | |
| ○Daylight priority | N/A | |
| ○High-low sensitivity | N/A | |
| ○Grouping | N/A |
【Product Information】
【Wiring Diagram】
*The sensor is designed for connect one load only. Connect more
than one loads may damage the sensor.
【Parameter】
| Input | ||
| Rated Voltage | 220-240VAC 50/60Hz | |
| Stand-by Power | ≤0.5W | |
| Surge Test | 1kV(L/N,EN61000-4-5) | |
| Output | ||
| Output Control | ON-OFF | 1-10VDC Dimming Signal |
| Load Capacity | 400W(Inductive/LED) ; 800W(Resistive) | |
| Max. Surge Capacity | 30A (50% Ipeak, twidth =500uS, 230Vac full load, cold start); | |
| Sensor Parameter | ||
| Operating Frequency | 5.8 GHz ±75MHz, ISM wave band. | |
| Transmitting power | 1mW Max. | |
| Detecting Radius | ≥2.5m @ ceiling mounting, ≥ 4mi @ wall mounting | |
| Mounting Height | 2.5-6m (ceiling mounting), 2-3m (wall mounting) | |
| Environment | ||
| Operating Temperature | -20~60°C | |
| Storage Temperature | -40℃~80℃, Humidity: ≤85%(Non-condensing) | |
| Certificate Standard | ||
| Certificate | CE, RED, UKCA, SAA, CB | |
| Environmental Requirement | Compliant to RoHS 2.0, Reach | |
| Safety standards | EN61058-1-2 | |
| EMC standards | EN61547, EN61000-3-2, EN61000-3-3, EN62479 | |
| IP Rating | IP20 | |
| Other | ||
| Wiring | Press-in type terminal block, wiring 0.5-1.0 mm2 | |
| Installation | Built-in | |
| Package | Bubble bag + Clapboard + Carton(K=A) | |
| Net Weight | 62±5g | |
| Lifetime | 5 years warranty @Ta | |
【Installation Instruction】
Screw installation
Cut Size
【DIP Switch Setting】
【Detection Range】
【Remote control】
【Initialization】
After power on, the sensor automatically turns on light to 100% brightness and turns off light in 12 seconds. During initialization, sensor is not able to detect movement.
【Default setting】
Sensitivity: 100%, Hold time: 5s, Daylight sensor: Disable, Stand-by Period: 0s, Stand-by DIM Level:50%
【Application Notice】
1. Sensor should be installed by a professional electrician. Please
turn off power before installing, wiring, or setting the DIP
switches.
2. Microwaves cannot penetrate metal. Do not place product in a
closed or a half-closed metal lamp. Neither metal nor glass is not
allowed to cover above the product. If antenna needs to pass
through the metal plate, please ensure that the top of sensor is
close to the metal plate.
3. Sensitivity area is related to moving speed of objects, size of
moving objects, mounting height, mounting angle, working
environment, reflecting materials and etc.. Given detecting area is
typical value that was measured by 165cm high testers in an indoor
open environment.
4. The daylight thresholds are measured on a sunny day without
shadow and in an ambient light diffuse reflection status. Different
environment and climate cause different brightness values that
daylight sensor measures.
5. The installation spacing between sensors is recommended to be
greater than 1.5m, and the installation spacing between sensors and
routers is recommended to be greater than 1.5m.
6. Sensor should not be covered or hided by metal, PCB, LED tray
etc..The spacing between the sensor antenna and surrounding
materials should be greater than 5mm. There should be no metal or
PCB tracks near the sensor antenna, above or below it. The
recommended thickness of cover is 2mm, and keep the spacing between
the sensor antenna and cover is greater than 3.2mm.
7. Vibration signals will be regarded as moving signals to trigger
sensor. Installing sensor should be away from the object that
vibrates for a long time, such as large metal equipment, pipes, air
conditioning outlets, exhaust vents, smoke exhaust machine ports,
shaking fans, etc. Pets in detecting area may cause false trigger.
8. The antenna surface of microwave module should be away from
input AC, output DC, rectifier bridge, transformer, switch tube and
other high-power devices to avoid high frequency signals affecting
the normal operation of microwave sensor’s antenna.
9. Sensor is for indoor use only. The waterproof effect for outdoor
or half-outdoor use will be affected. Wind, rain, and moving
objects may cause false triggering.
Operating Frequency 5.8 GHz ±75MHz IP20 Dimmable Motion Sensor for LED Batten
Inquiry Cart
0