Led dimmable driver for 10w downlight
Brand Name:KREATPOWER
Certification:CE
Model Number:KL10C-PDii1
Minimum Order Quantity:100
Delivery Time:1. Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Supplier`s last login times:
within 33 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Led dimmable driver for 10w downlight
【Product Feature】
- Flicker-free for whole dimming range
- Stand-by power below 0.5W
- Primary dimming with push button
- Built-in DALI interface DT6
- Protection: short circuit / over temperature/ over voltage
- Derating current for over high ambient temperature
- Push dim with memory function
- 5 year warranty
【Parameter】
| Input | Models | 150mA | 200mA | 300mA | 350mA | 500mA | |||||
| Operating Voltage | 198-264VAC 50Hz /60Hz | ||||||||||
| Rated Input Voltage | 220-240VAC 50Hz /60Hz | ||||||||||
| DC Input Voltage range | 200-240VDC | ||||||||||
| Input Cuttent | 0.06A Max. | ||||||||||
| Input Inrush Current | <10A (Half current pulse width 100US) @230VAC | ||||||||||
| Power Factor | ≥0.95 @230VAC (Full load) | ||||||||||
| Total harmonic distortion | Typical: 20% (@230Vac, 100% load) | ||||||||||
| Stand-by Power | ≤0.5W(@230Vac) | ||||||||||
| Efficiency | 83%Max. @230VAC (Full load) | ||||||||||
| Wiring Method | INPUT: AC:0.5mm2 DALI:0.5mm2; | ||||||||||
| Automatic circuit breaker | type | B10 | B13 | B16 | B20 | B25 | |||||
| Number | 70 | 80 | 105 | 130 | 160 | ||||||
| Diameter | 1.5mm2 | 1.5mm2 | 2.5mm2 | 2.5mm2 | 2.5mm2 | ||||||
| type | C10 | C13 | C16 | C20 | C25 | ||||||
| Number | 40 | 50 | 65 | 85 | 100 | ||||||
| Diameter | 1.5mm2 | 1.5mm2 | 1.5mm2 | 1.5mm2 | 2.5mm2 | ||||||
| Output | Load type | LED | |||||||||
| Ripple requirement (Flickering or flickering-Free) | Flicker value: less than 2% for whole dimming range | ||||||||||
| Start up time | <1s (@230Vac) | ||||||||||
| No-load output voltage | 48VDC Max. | ||||||||||
| Operating mode | 150mA | 200mA | 300mA | 350mA | 500mA | ||||||
| Load output voltage range | 3-40V | 3-40V | 3-33V | 3-28V | 3-20V | ||||||
| Full load output power | 0.45-6.0W | 0.6-8.0W | 0.9-10W | 1.05-9.9W | 1.5-10W | ||||||
| Load output current | Single Current | ||||||||||
| Output current/voltage tolerance | ±5% | ||||||||||
| Output | Wiring method | Wire cross section:0.5mm2 | |||||||||
| Control Method | Primary PUSH Dimming | Primary PUSH dimming (Max.lead length:20M) | |||||||||
| 1-10V Dimming | NO | ||||||||||
| Dimming Range | Primary PUSH & DALI dimming: 0%-100% | ||||||||||
| Potentiometer | NO | ||||||||||
| DALI Dimming | DALI dimming (Max.lead length:300M) | ||||||||||
| Exception Protection Requirements | Output over temperature protection | Yes, without self recovery function(Can be inquired) | |||||||||
| Output short circuit protection | Yes, without self recovery function(Can be inquired) | ||||||||||
Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity:85% (Non-condensing) | |||||||||
| Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% | ||||||||||
| Max. case temp(Tc) | 85℃ | ||||||||||
Safety & EMC | EMC standard | EN55015 EN61547 EN61000-3-2 EN61000-3-3 | |||||||||
| DALI protocol standard | IEC62386-102 IEC62386-207 DT6 251 253 | ||||||||||
| Safety standard | EN61347-1 EN61347-2-13 | ||||||||||
| Certification | CE | ||||||||||
| Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) | ||||||||||
| Others | Degrees of protection | IP20 | |||||||||
| Type of protection | Class II | ||||||||||
| Installation type | Independent installation | ||||||||||
| Installation dimension | 64.5*40*23mm | ||||||||||
| Blackout memory function | Yes, PUSH blackout memory | ||||||||||
| PUSH dimming synchronization | 20 units Max. | ||||||||||
| Packaging requirement | white box+ Instructions Clapboard Outer Carton(K=A) | ||||||||||
| Weight | 80g | ||||||||||
| Life | 50000h @Ta full load | ||||||||||
| Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified. | |||||||||||
【Dimension (Unit:mm)】
【Wiring Diagram】
Fig. A DALI Dimming Fig.B Push Dimming
【Derating】
【Dimming curve】
【ON/OFF & Description of Dimming Operation】
A. Short press the PUSH switch (short press time 0.1S-1S), the LED driver will turn on or off.
B. Dimming: Press and hold the PUSH switch (1S-8S), the LED driver can achieve dimming, brightening or dimming, the dimming range is 2-100%.
C. Memory: PUSH dimming has dimming memory function.
D. Dimming synchronization: The power connected to the same PUSH switch can be synchronized by pressing and holding the PUSH switch for longer than 15S
E. DALI dimming mode: Connect the power supply to the DALI system, and it can be dimmed by the DALI host. The dimming range is 0-100%.
【Attention】
1) The LED string must be connected to the load before turning on the input power, otherwise the LED string may be damaged.
Led dimmable driver for 10w downlight
Inquiry Cart
0