High Performance Injection Mold Hot Runner Heaters with Thermocouple J
Brand Name:GME
Certification:CE & ISO
Model Number:-
Minimum Order Quantity:10 pcs
Delivery Time:7-15 working days after received your payment
Payment Terms:L/C, D/P, T/T, Western Union, Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Wuhan Hubei China
Address:
2303 Century Square , Zhongnan Road , Wuhan ,China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Hot Runner Heaters with Thermocouple J
1. Hot Runner Heaters Brief Introduction
Wuhan Global Metal hot runner heaters use Germany heater wire,
United States high-purity magnesium oxide material, and strict
process technology. There are various cross section and size for
choice, such as square, round and flat, provide high-performance
electric heater for heating hot runner mold and other fields.
Heater maximum temperature up to 650 ºC, the integration of
temperature thermocouple for the precise temperature control, can
provide K, J, E thermocouple, blasting and blackening surface
treatment, also can provide bright surface.
2. Hot Runner Heaters Characteristics
a. Very good performance of the heating uniformity in the heating
area.
b. The inside insulated cover, same as the German GC.
c. High insulation (more than 500M ohm) and high pressure
resistance (1000V above), can meet special requirement if customers
need.
d. The moisture-proof can be IP65, suitable for working in bad
condition.
3. Hot Runner Heaters Parameter.
- Standard Configuration
- Material :304
- Unheated length(L1):45mm
- Connector(cold side)(D1xU): Ф3.5x40mm
- Power lines,grounding wire length(L):1000mm
- Surface treatment:sandblasting;
Spring coil heater (H series) | 3.0x3.0 | Φ3.0 | Φ4.0 | Φ5.0 | 3.5x3.5 | 5.0x5.0 |
Voltage | 220V,230V,240V | |||||
Power tolerance 115W-200W | +/-10% | |||||
Power tolerance 201W-2000W | +5%-10% | |||||
Out jacket length | 30mm~280mm | |||||
Diameter of the inner sleeve/wrapped diameter | 10mm~42mm | |||||
Unheating length | 45mm | |||||
Max power density | 9W/cm² | |||||
Heating Length tolerance | +/-0.05mm | |||||
Unheating length tolerance | +/-2.5% | |||||
Tolerance ID d ≤20mm | Without inner sleeve:-0.15mm | |||||
Tolerance ID d 20mm~30mm | Without inner sleeve:-0.20mm | |||||
Tolerance ID d ≥30mm | Without inner sleeve:-0.25mm | |||||
Tolerance cross section | +/-0.15mm | +/-0.20mm | ||||
Thermocouple | K,J,E | None | ||||
Material | 304,321,316 | |||||
Maximum working temperature | 650℃ | |||||
Die electrical strength | 800V | 1000V | ||||
4. Hot Runner Heater Application
This hot runner heater is widely applied for hot runner system,
plastic industry, packaging machinery, medical equipment, casting
process,other electric heating industry, etc..
5. Packing Information.
6. Transportation.
High Performance Injection Mold Hot Runner Heaters with Thermocouple J
Inquiry Cart
0