200kva Intermediate Frequency Electric Welder DC Copper Braided Wire Welding And Cutting

200kva Intermediate Frequency Electric Welder DC Copper Braided Wire Welding And Cutting

DESCRIPTION

This machine is designed to complete the process of welding and cutting automatically as per customer requirement.

The shape of welding and length of cutting could be adjusted through program. The welding length is 60-100mm (adjustable). It can weld 4- 14 wires. The dimension of welding (width and length) is maximum 8x10mm and minimum 4x4.5mm (adjustable).

Through the feeding system-wire output wheel, the braid wire enters into the welding center to complete the process of feeding wire. Then the wire output system stop working, the welding forming device start working to press the wire on the preset position. The cylinder will press down to complete the welding. Next, the stay wire cylinder start to output the wire to preset length. When reaching the preset value, the cutting device starts cutting the wire. At last, the stay wire cylinder starts to pull out the completed wire and put it into the discharging box.

FEATURES

1. The key point of design is the welding power source. Since area of the wire after welding is large, the three-phase secondary rectifying power source is adopted to ensure the stability of welding. It can output direct current to weld.
2. The slide way is controlled by the feeding cylinder. The speed of feeding is adjustable while the feeding length could be adjusted randomly through setting the magnet switch.
3. It contains 14 sets of material feeding plate at most. They could be used randomly according to the requirement of product. The only thing that needs to be done is to adjust the parameter.
4. Adopt digital PLC control wiring. It is equipped with double functions of automatic protection and correcting. It makes the quality of product stable, reliable and precise in order to ensure the process of full automatic welding.
5. The max stay wire length is 100mm. The blade adopts cylinder direct drive operation mode.
6. There is voltage compensation function built-in in the control circuit to ensure the fluctuation of power is within the range of ±15%. It will compensate the current immediately to ensure the stability of welding current.
7. Good human-machine connector to make the operation interface simple and clear.
8. There is automatic failure alarming procedure built-in in the system to ensure the percent of pass of product.
9. Water cooling function can prolong the service life of welding tip so as to guarantee the quality of product.

TECHNICAL PARAMETERS

APPLICATION

Welding of braid wire of electrical parts like distribution switch, disconnector, etc. Be able to weld and cut 1 to 25 mm² of singlet wire, double wire, and three-wire in one of annealed copper wire.

The cutting length could be adjusted freely and the cross-section of connecting wire could be designed as different shapes like semi-circle, square, and hexagon, etc.

COMPETITIVE ADVANTAGE

1. HWASHI is the leading brand in resistance welding industry in China for 20 years; Factory direct sale, competitive price.

2. Customized Service: We can help to design and develop the welding machine according to your requirement. We are flexible and capable Supplier.

3. Genuine Product with Excellent Quality: 12 months warranty. Our machines are strictly complied with ISO9001:2000 and China Compulsory Certification. Most of our machines enjoy 8-10 years service life. 100% guarantee test before delivery.

4. After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.

5. Quick Delivery: Our company provides just-in-time delivery.

6. Prompt Response to Customers: Your satisfaction is the goal we pursue.

ABOUT US

Guangdong Hwashi Technology Inc. was established in 2001 whose registered capital is RMB 10.309 million.

Hwashi has two production bases in Huizhou, Guangdong Province and Gaoan, Jiangxi Province, covering

a total area of 50,000 square meters. Several branches were set up in Hong Kong, Shenzhen, Shanghai,

Wenzhou, etc. Hwashi is the leading company in welding industry in China and has been awarded the famous

brand for years. Hwashi welding machines are selling to more than 70 countries like areas in Russia, India,

Turkey, Chile, U.S. Saudi Arabia, Italy, Hungary, South Korea, Japan, etc. for providing the best welding machine

and automation solution to the top companies all over the world.

Hwashi company is a high-tech enterprise which is specialized in developing, manufacturing and selling

of standard resistance welding machine, customized automatic welding machine, and industrial robot, etc.

A professional and rich experienced technical team gathered in Hwashi. They insist in self-developing

and take the overseas advanced technology as reference and has obtained more than 70 national patents.

Except for the standard resistance welding machine, they also devote in developing all kinds of automatic

welding machine and production line. Lots of automatic welding production lines has been designed and

manufactured for famous companies in domestic and abroad successfully. Hwashi equipment has

been widely applied to manufacturing industries like cookware, automobile, motorcycle, hardware,

household appliances, low-voltage apparatus, elevator, compressor, etc. In terms of quality, Hwashi has

obtained ISO9001:2000 certificate of quality system, CCC and CE certificate. The main customers

include MIDEA Group, SUPOR Group, GREE Group, Shanghai Panasonic, DELIXI, BYD, MEYER Thailand,

BRG India, etc.

"Caring for our customers and providing earnest service" is the aim of Hwashi company. To meet what you

need is the goal Hwashi pursue. They are committed to become the top class welding solution expert in the

world and break through all kinds of welding difficulties to create real value for customers.

Professional Team

Over the years, Hwashi has cultivated a large number of talented, dedicated and innovative Hwashi people.

We have a professional team of experts with rich experience in electrical engineering, mechanical design and

welding technology.

FAQ:

Q1: what is the price of your machine?
Answer: our machines are customized for your requirements. If you want to get the appropriate

price, please provide us the following information.
* The material and thickness of your product
* The minimum and maximum size of your product
* The welding position of your products
* The automation level that you want to achieve
* It would be better if you can provide us the detailed product drawings so our engineer can come out with

the suitable technical proposal and price for you.

Q2: what is the warranty period of your machine?
Answer: our standard warranty period is one year after shipment. If you want to extend the warranty period,

there will be extra cost.

Q3: what if my machine damaged doing the warranty period?
Answer: firstly, our engineer will help you to diagnose the problem via online guidance. if any parts damaged

during the warranty period, we will send the parts to you for replacement free of charge. If you can not fix he

problem by replacement of the new parts, we will send engineer to your factory to help fixing the machine.

Q4: what is the delivery time of your machine?
Answer: it depends on the complexity of your machine. Most of our standard machine we got in stock, then

we can shape the machine with the seven days after receiving your payment. If you need the Customized

machine, normally it would take about 30-90 days to complete the machine.

Q5: can we send the sample to you for welding test?
Answer: yes. You can send us the samples for welding test and we will send you the pictures and videos

after the testing. If you need, we can also send the samples back to your country so you can check

the welding quality by yourself before ordering the machine.

Q6: can you provide us the machine drawings and technical proposal?
Answer: yes. After receiving your detailed requirement and product drawings, our engineer will come out

with the suitable technical proposal with the basic machine concept drawings to you. Be size after you

placing the order we will send you the more detailed design drawings of the machine to you for confirmation.

Only after you confirming the drawings then we will start the manufacturing process.

Q7: what’s your payment terms?
Answer: we can accept the following payment terms: T/T, L/C, Western Union, Alibaba trade assurance.

(we prefer you to choose the Alibaba trade assurance order. If you are not satisfied with the machine that

you order, or we delay the shipping time, then you can apply the complaint on alibaba.com. )

Q8: how can we install the machine?
Answer: for some simple machines we will provide you the english operation manual, the operation video

and also we will provide you the online guidance and training to your engineer so you can set up the

machine easily. For some complicated machines, we will send engineer to your country to help installation

and training. But there will be extra cost for Engineer, including the salary, visa cost, round-trip ticket

cost, and accommodation fee will be covered by the buyer.