LAN9500A-ABZJ Advanced USB 2.0 to 10/100 Ethernet Controller with Hi-Speed 480Mbps Integrated MAC/PHY & EEPROM Ultra-Low Power Industrial Temp Robust ESD and Compact 36-pin QFN for Embedded Designs

LAN9500A-ABZJ Advanced USB 2.0 to 10/100 Ethernet Controller with Hi-Speed 480Mbps Integrated MAC/PHY & EEPROM Ultra-Low Power Industrial Temp Robust ESD and Compact 36-pin QFN for Embedded Designs

Features

• USB Device Controller

- Fully compliant with Hi

-Speed Universal Serial Bus Specification Revision 2.0

- Supports HS (480 Mbps) and FS (12 Mbps) modes

- Four endpoints supported

- Supports vendor specific commands

- Integrated USB 2.0 PHY

- Remote wakeup supported

• High-Performance 10/100 Ethernet Controller

- Fully compliant with IEEE802.3/802.3u

- Integrated Ethernet MAC and PHY

- 10BASE-T and 100BASE-TX support

- Full- and half-duplex support

- Full- and half-duplex flow control

- Preamble generation and removal

- Automatic 32-bit CRC generation and check ing

- Automatic payload padding and pad removal

- Loop-back modes

- TCP/UDP/IP/ICMP checksum offload support

• Flexible address filtering modes

–One 48-bit perfect address

–64 hash-filtered multicast addresses

–Pass all multicast

–Promiscuous mode

–Inverse filtering

–Pass all incoming with status report

Applications

• Embedded Systems

• Set-Top Boxes

• PVRs

• CE Devices

• Networked Printers

• USB Port Replicators

• Standalone USB to Ethernet Dongles

• Test Instrumentation

• Industrial

Description

The LAN9500A-ABZJ is a high-performance, highly integrated single-chip USB 2.0 to 10/100 Ethernet controller, designed for embedded systems, network adapters, and a variety of consumer electronic devices requiring wired network connectivity.

The core advantage of this chip lies in its high level of integration. It incorporates a USB 2.0 Hi-Speed physical layer (PHY), a 10/100 Ethernet physical layer (PHY), an Ethernet Media Access Controller (MAC), and an integrated EEPROM all into a single chip. This design significantly simplifies the peripheral circuitry, reduces the number of external components, thereby lowering overall system cost and printed circuit board (PCB) space requirements, while enhancing design reliability.

The LAN9500A supports USB 2.0 "Hi-Speed" 480 Mbps data transfer rates, ensuring fast and smooth network data throughput over the USB interface. It features advanced power management capabilities for ultra-low power consumption, making it ideal for portable and energy-efficient applications. Furthermore, the device supports an extended industrial temperature range (-40°C to +85°C) and provides robust embedded ESD protection, enabling it to withstand harsh industrial environments and demanding electrical conditions, ensuring high stability and durability. Its compact 36-pin QFN package further optimizes space-constrained applications.

INFORMATION

Drawing

Our advantage :phones, PDA's, notebook comput.ers

• High quality products --- our offers are 100% new and original, ROHS
• Competitive price --- good Purchase channels with good price.
• Professional service --- strict quality testing before the shipment, and perfect after-sales service after the purchase.
• Adequate inventory --- With the support of our strong Purchasing team,
• Fast delivery --- we will ship the goods within 1-3 working days after the payment confirmed.

be sure to meet your need for all kinds of components. ^_^


Product List
Supply a Series of Electronic Components, full range of semiconductors, active & passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,


The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer & Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal & Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)

Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

Thank you for your time to know our company and lean our production.

TOP Electronic Industry co., Ltd was established in 2006. After 10 years effort and development, now we have become one of the leading electronic components distributors in China. We keep very kind relationship with our suppliers and partners, and put our customers in the first place always.

Here we can offer one-stop solution service: from PCB design, production to PCB assembly, from a series of components offer to the BOM list.

In addition to its component supply service, TOP distributes industry respected communication modules(GPS,GSM/GPRS,3G,LTE 4G modules) and accessories. All the brands are very famous and welcome by the customers all over the world, they are including: Sierra Wireless, SIMCOM, CINTERION, U-BLOX, HUAWEI, ZTE,TELIT, HOLUX etc. competitive price, Adequate inventory, fast delivery, be praised by all the customers .

As an innovative company, TOP supplies and markets high-quality wireless communication antennas and RF-cables. to work with modules together. With more than 8 years antenna experience, we win a lot of stable customers from more than 50 countries. In order to save the cost and delivery time, control the quality, supply the competitive price for our customers, we built our own antenna factory in 2012,which is for developing and manufacturing GPS antenna, GSM/GPRS antenna, WIFI antenna, LTE antenna, all kinds of combo antennas etc. Quality, stability, accessibility are all important to us.

The third production-line is Supply a Series of Electronic Components, including Integrated Circuits, Transistor, Diode, LED, LCD display, Capacitor, Resistor, Inductor, Relay, Crystal , Terminal block ,pin header etc.

Our Strong in Brand including Microchip, MAX, AD, TI, NXP, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

As a global distributor of electronic components, we stocking the world's widest range products of semiconductor and electronic components. You can get one stop service here include BOM(bill of material) purchasing, testing, design for your project. Our experienced team is providing the most excellent service to meet your needs and satisfaction.

With rich experience on wireless product and electronic components, we win our customers with good quality and competitive price. We only offer the products 100% original from the factory.

TOP has never stop going forward, we always want to give our customers best service. in 2013, together with our partners, we built another PCB factory. In this factory, we can make design, supply PCB, make PCB SMT and DIP assembly, offer BOM service. As a professional supplier , We have a strong procurement team and are therefore able to provide customers with competitive prices and good quality. This is our advantage to you.

As they are to you. Just as in our name, TOP strives to be a leading business in the electronic industry. Our high quality products and professional service, are sure to meet your need for all kinds of electronic components.

You are searching for creditable and professional supplier to work with; we are also looking for sincerely and long-term customers. Once we find each other, we could make rapid progress together!