Add to Cart
75 bar High Pressure Stainless Steel Water Solenoid Valve 3/8'' 1/2'' 3/4'' 1'' 24V 220V
Product Features:
1. Working Medium: Water, Air, Gas, Oil, Liquid, etc
2. Working Temperature: NBR (-5 to +80ºC), FKM (-10 to +150ºC),
PTFE (-20 to +180ºC)
3. Max Working Pressure: 75 bar
4. Body Material: Stainless Steel 304
5. Seal Material: NBR, FKM, PTFE
6. Port Size: 3/8'', 1/2'', 3/4'', 1''
7. Orifice Size: 15mm, 20mm, 25mm
8. Function: 2 Way Normally Closed
9. Operation: Pilot Piston Operated
10. Voltage: 12VDC, 24VDC, 24VAC, 110VAC, 220VAC (50/60Hz)
Technical Data:
Model No | Port | Orifice | CV | Min Pressure (bar) | Max Pressure (bar) | Body | Seal | Function | |
AC | DC | ||||||||
H6S15B03 | 3/8'' | 15mm | 4.2 | 1 | 75 | 55 | SS304 | NBR FKM PTFE | 2 Way NC |
H6S15B04 | 1/2'' | 15mm | 4.2 | 75 | 55 | ||||
H6S20B06 | 3/4'' | 20mm | 7 | 65 | 50 | ||||
H6S25B25 | 1'' | 25mm | 11 | 55 | 45 |
Main Dimension:
Model No | Port | A | B | C |
H6S15B03 | 3/8'' | 75 | 52 | 130 |
H6S15B04 | 1/2'' | 75 | 52 | 130 |
H6S20B06 | 3/4'' | 85 | 60 | 141 |
H6S25B25 | 1'' | 100 | 70 | 148 |
Our Production:
FAQ:
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert
media in an application. They are used in a wide variety of
applications.
Question 2: How can you tell if your solenoid valve is bad?
Answer 2: If the solenoid valve fails to open or close, is
partially open, makes a humming noise or has a burned-out solenoid
coil, you need to troubleshoot the valve solenoids.
Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know
your media. Depending upon the media and flow requirement, choose
the material, port size, orifice size, temperature, pressure,
voltage, response time and certification required for your
application.
Similar Valves:
Max 120 bar | Max 200 bar | Max 300 bar | Max 360 bar |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!