Festo Type FRC-1/2-D-5M-MIDI-A Compressed Air Source Treatment Unit

Festo Type FRC-1/2-D-5M-MIDI-A Compressed Air Source Treatment Unit

Filters, regulators and lubricators can be purchased individually or as a combined filter-regulator (FR) or filter-regulator-lubricator (FRL) unit. It is recommended to install an FR unit if your equipment is self-lubricating and an FRL unit if your equipment requires lubrication. It is important to understand the air requirements of your system and components to know if and what components of an FRL unit are needed. The type of FRL components required is dependent on your system requirements, but it is recommended that every air system uses at least one filter and one pressure regulator. Most modern pneumatic tools use self-lubricating seals and as such, you often do not need to install a separate lubricator. If they aren’t self-lubricating, a lubricator should also be installed in the system. As a general rule, a pneumatic system’s order of installment is in this order: compressor, filter, regulator, and then a lubricator. Give careful consideration to the location of these devices because you may not need to treat your entire air system. To optimize the pneumatic system and reduce cost, only treat air where air needs to be treated.

Specification of FRC series Filter Regulator Lubricator:

Main Parts Material of FRC series Filter Regulator Lubricator:

Dimension of FRC series Filter Regulator Lubricator:

Other Pneumatic Products BRANDO supply:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on