G3/8'' ADK11-10A / 10G / 10N CKD Type Brass Solenoid Valve Pilot Kick 2 Way Diaphragm Valve

G3/8'' ADK11-10A/10G/10N CKD Type Brass Solenoid Valve Pilot Kick 2 Way Diaphragm Valve

G3/8'' ADK11-10A/10G/10N CKD Type Pilot Kick Brass Solenoid Valve is a two-position normally closed solenoid valve with power-off and power-off. The valve body is made of copper and SS304 stainless steel (conventional), SS316 stainless steel (customized), maximum pressure resistance of 2 MPa, ambient temperature - 10 ° C ~ 60 ° C, product serial production, small size, large flow, a wide range of applications according to the flow arrow on the valve, can be installed arbitrarily; to enhance the service life, the best coil up, horizontal installation. Voltage: AC220V/230V/240V/110V/24V 50/60HZ DC24V/12V +10% to -10% allow for fluctuations. Diaphragms and seals can be made of NBR, VITON, EPDM, etc., to suit different fluid switching controls.

Technical parameters of ADK11-10 CKD Type Pilot Kick Type 2 Way Solenoid Valve:

Common specifications of CKD Type ADK11-10A/10G/10N Pilot Kick 2 Way Solenoid Valve:

Main dimension of ADK11-10A/G/N CKD Type Pilot Kick Solenoid Valve NC Normally Closed Type:

Detail enlargement of G3/8'' inch brass body ADK11-10 CKD type thread port solenoid valve:

Production of ADK11-10A / 10G / 10N CKD Type 2 Port Pilot Kick Solenoid Diaphragm Valve:

More details about CKD Type ADK11-10G/10A/10N Pilot Kick Solenoid Valve in below Youtube Video:

Introduction of Solenoid valve flange and thread connection:
How to connect the solenoid valve with the pipeline or equipment, this problem can not be ignored, because the running, dripping and leaking of the valve, most of them happen here.

1. Flange connection: Flange connection is the most used connection between the valve and the pipe or equipment. It refers to the detachable connection of a set of combined sealing structures by flanges, gaskets and bolts. Flange connection is easy to use and can withstand large pressures. Flange connection can be applied to valves of various nominal sizes and nominal pressures, but there are certain restrictions on the use temperature. In high temperature conditions, the flanges of the flanges are prone to creep and cause leakage. Under normal circumstances Blue connection is recommended for use at temperatures up to ≤350 °C.

2. Threaded connection: Threaded connection is a simple connection method, which is often used for solenoid valves with small interface sizes.

There are two types of threaded connections:

1. Direct sealing: internal and external threads directly seal. To ensure that the joint does not leak, it is usually filled with a tape. This material has excellent corrosion resistance, excellent sealing effect, easy to use and store, and can be completely removed when disassembled.

2. Indirect sealing: The force of thread tightening is transmitted to the gaskets seen on both sides, allowing the gasket to seal.

3. Clip connection: the connection form of directly clamping the valve and the two pipes together by bolts.

4. Coupling type: It is made of PVC stainless steel, etc. It is also called oil and double, and its shape is three-dimensional polygon design. The inner layer is engraved with three-dimensional thread. The connection form is a fixed joint and a live female joint. The two ends are connected with the corresponding pipe threads, and the middle is sealed with a PVC pad or a rubber pad, which has the advantages of convenient installation and disassembly.

There are many other forms of connection, such as small valves that do not have to be removed, welded with pipes; some non-metallic valves, with cannulated connections, and so on. Solenoid valve users should be treated according to the circumstances.

Welcome to your any question and inquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on