YM-B5 Penetration Comparison Standard Test Block CE
Brand Name:HUATEC
Certification:CE
Model Number:YM-B5
Minimum Order Quantity:1 SET
Delivery Time:3-5 working days after receipt of your payment
Payment Terms:T/T, Western Union,Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Supplier`s last login times:
within 21 hours
Product Details
Company Profile
Product Details
YM-B5 Penetration Comparison Standard Test Block
The YM-B5 penetration test block (also known as the stainless steel five point test block) is a means of verifying the sensitivity and operational accuracy of the penetrant. At the same time, the test block has a rough surface in the sandblasting area, which is used to verify the cleaning performance of the penetrant and the accuracy of the cleaning method. Its sensitivity is determined by the number of defects displayed and the diameter of each point in the radial domain, making it a functional standard test block.
Maintenance of test blocks:
The comparison test block must be thoroughly cleaned after use to remove any residual penetrant on the test block. After cleaning, soak it in anhydrous ethanol solution for 30 minutes, air dry or blow dry it, and place it in a test block box, and store it in a dry place.
Test standard:ISO 3452-3:1998(E),JB/T6064
Specification | All linear dimensions to the requirements of AS2083/2005,BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. |
| Material: | according to ISO 10474-3.1.B,JIS G 0415-3.1.B |
| Depth | 100µm |
| Width | 00.5µm |
| Oxidizing property | Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled |
YM-B5 Penetration Comparison Standard Test Block CE
Inquiry Cart
0