High Security Prison Anti -Cut Wire Fencing Panels Anti-Climb
Security Resisdential Fence
358 anti climb fence, known as "prison mesh", is a high security anti-climbing and anti-cutting welded wire fence. Galvanized wire,
commonly, is welded into fencing panels with extremely fine opening
holes, which cannot be penetrated by hand fingers or cut by bolt
cutters. Therefore it is highly recommended for high security
needed area and private living field.
The name—358 high security fence comes from the size of panel mesh
opening and wire diameter: 3'' × 0.5'' × 8 gauge, approximately
equals to: 76.2 mm × 12.7 mm × 4 mm. As a welded wire fence,
galvanized after welded and then PVC coated is recommended for a
sturdy structure and corrosion resistance ability.
358ACF-01: Black PVC coated 358 anti-climb fence is more in harmony with
residential and commercial places.
358ACF-02: Together with razor wire, 358 anti-climbing fence deters intruders
and provides a high degree of security.
358 anti climb fence features:
Anti-climb: The opening holes are so small that even fingers cannot penetrate
in.
Anti-cut: Bolt cutter and wire cutter cannot make itself through the narrow
holes, therefore the fence won't be destroyed.
Strong welded point: The welded joints are fixed firmly, won't split by natural human
and nature force.
Smooth surface: The panel finish surface is well-proportioned for a decorative
effect.
Durable: The panel sheet is galvanized uniformly and PVC coated, which
ensures a long service life.
358 anti climb fence application:
358 anti climb fence is a high secure fence, suitable places
include:
Prison.
Military sites.
Detention center.
Psychiatric hospital.
Airport.
Bridge.
Sub-station.
Specification:
358 mesh panel size
Mesh pattern: 76.2 mm (3") × 12.7 mm (0.5").
Wire diameter: 4 mm horizontal wire and vertical Wire.
Weld strength: range 540–690 N/m2.
Surface treatment: 358 mesh fence panels made from galfan wire, then PVC powder
coating (Min. 100 micron), or PVC powder painting. It provides
additional protection and increases the potential life span.
Colors: green (RAL 6005), black (RAL 9005). All RAL color is available. Accessories: posts, post base feet, barbed wire, slotted clamp bars, post cap,
bracket, bolts, spacer, nuts, washer, clips, etc.
Fence posts
Material: high grade steel for maximum strength and rigidity.
Post section: 60 × 60 mm, 80 × 80 mm, 100 × 100 mm, 120 × 120 mm.
Post Plate thickness: 2.5 mm or 3.0 mm, 4.0 mm, 5.0 mm.
Finish: inside and outside galvanized (Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 micron ).
Colors: same as panel.
Post cap: metal caps or plastic cap.
Metal clips and clamps are hot dip galvanised then powder coating
in green or black color.
Table-1: 358 mesh fence specifications
Product ID | Fence height (m) | Panel size (height × width) (mm) | Fence post (height × size × thickness) (mm) | Clamp bar (height × width × thick) (mm) | Inter or corner clamp no (pcs) |
---|
358F01 | 2.0 | 2007 × 2515 | 2700 × 60 × 60 × 2.5 | 2007 × 60 × 5.00 | 7 or 14 |
---|
358F02 | 2.4 | 2400 × 2515 | 3100 × 60 × 60 × 2.5 | 2400 × 60 × 5.00 | 9 or 18 |
---|
358F03 | 3.0 | 2997 × 2515 | 3800 × 80 × 80 × 2.5 | 2997 × 80 × 6.00 | 11 or 22 |
---|
358F04 | 3.3 | 3302 × 2515 | 4200 × 80 × 80 × 2.5 | 3302 × 80 × 6.00 | 12 or 24 |
---|
358F05 | 3.6 | 3607 × 2515 | 4500 × 100 × 100 × 3.0 | 3607 × 100 × 7.00 | 13 or 26 |
---|
358F06 | 4.2 | 4204 × 2515 | 5200 × 100 × 100 × 4.0 | 4204 × 100 × 8.00 | 15 or 30 |
---|
358F07 | 4.5 | 4496 × 2515 | 5500 × 100 × 100 × 5.0 | 4496 × 100 × 8.00 | 16 or 32 |
---|
358F08 | 5.2 | 5207 × 2515 | 6200 × 120 × 120 × 5.0 | 5207 × 100 × 8.00 | 18 or 36 |
---|
Note:
Our fence wire diameter varies from 2–6.5 mm, mesh opening could be
75 mm × 12.5 mm, 100 mm × 15 mm, other opening size available under
request.
Maximum width is 2.515 m. 2.0 m and 2.2 m is also available under
request.
Fence height varies from 2.0 m to 5.2 m.
3 m height fence is usually used in school, residential and
recreational sites, 5.2 m height used in prison and military
establishments.
Our 358 high security mesh fencing could be manufactured with
double layers of vertical wires in order to satisfy the highest
level of security requirement.
358ACF-03: Bolt cutter cannot even stretch into small hole of 358 fence, no
mention of cutting.
358ACF-04: The wire diameter and mesh opening follow strictly the standard
size.
Installation:
Panels could be overlapped 75 mm minimum at each post and fastened
with a slotted clamp bar and bolts. (see picture 358FI-05 below)
Panels could be bind together without overlap but by brackets. (see
picture 358FI-06 below)
Spacing between brackets in post would better be 0.3 m.
A full installation guide is available under request.
358ACF-05: Two panels were installed into a narrow post with 75 mm overlap
for a solid structure.
358ACF-06: Two panels were installed into a wide post with brackets without
overlap but still firm.
358 mesh fence panels packaging:
358 mesh fence panels packed in wooden pallets and enveloped by
plastic film then wrapped by tape firmly for the security of
storage and transportation.
358ACF-07: 358 mesh fence panels packed in pallets and then enveloped by
plastic film for transportation and storage.
358 Prison Mesh Fence System has been developed for applications
where security andlongevity are paramount concerns. The system is
very durable, near-impossible to climb nor breakthrough (without
cutting tools), modular, low maintenance, and blends into its
environment.
Fence Panels: 2515 mm wide, flat, rigid, fully-welded mesh panels,
constructed from 4 mm diameter
steel vertical wires, set 75 mm apart welded to 4 mm dia. steel
horizontal wires set 12.5
mm apart, giving its characteristic 75 x 12.5 x 4 mm mesh
configuration. In imperial
measurements the mesh is 3 inch x 0.5 inch x 8 gauge, hence its
name “358”’.
Fence Posts: Rectangular Hollow Section (RHS) steel sections, set
into concrete foundations at 2.44
metre intervals.
Clamp-strips: 40 x 5 mm steel Flats (one per panel height), slotted
at 300 mm intervals for galvanised
security bolts.
Finish: All manufactured steelwork Galvanised and Polyester Powder
Coated.
358 Prison Mesh Fence
SYSTEMS BENEFITS & CHARACTERISTICS:
• Because of its durability and security value, 358 mesh is
commonly used to surround prisons and
secure units – hence its nickname Prison Mesh.
• Largely maintenance free: galvanised and a polyester powder
coated, with galvanised fittings.
• Comprise rigid panels that will not sag or deform (during normal
usage).
• Present no sharp protrusions utilising flat clamp-strips and
dome-headed security fixings.
• They are designed to avoid head and finger traps with covered
panel joints and a tight mesh
aperture.
• Are ‘anti-vandal’ in their design - utilising security bolts
(with snap off nuts or hidden inserts), and a
dense mesh which cannot easily be cut/damaged, and are
near-impossible to climb.
• In the event of vandalism/damage, they are modular, i.e.
individual component parts can be easily
replaced.
• Aesthetically pleasing and blends into its environment (available
in a wide colour range).
• Have excellent see-through qualities, reducing shadows and blind
spots, and making it easy to
monitor use and/or abuse.
• Due to its rigidity and durability 358 Prison Mesh Fence is often
used as a rebound surface for sports pitches.
358 Mesh Fence Perfectly suited to high security applications,
providing excellent see through visibility extensively used with
CCTV. This high performance system provides the ultimate protection
against anti-climb & cut through. Suitable to be used on schools,
retail parks, business parks, utility sites, airports, secure
units. Detection systems are fully compatible with 358 Mesh Fence
358 Mesh Fence is designed for demanding applications. The system
can have multiple additional features to aid additional security
including detection and electrified fencing
Panels | Posts | | |
---|
| | Total number of fixings |
---|
Inters | Corners |
---|
Fence height mtrs | Panel size H & W | Wire diameter mm | Clamp bar 40 x 5 mm | Post centres mm | Hanging bracket | Hanging bracket |
---|
2 | 2000 x 2515 | 4 | 2 | 2480 | 8 | 16 |
2.4 | 2404 x 2515 | 4 | 2 | 2480 | 9 | 18 |
2.7 | 2430 x 2515 | 4 | 2 | 2480 | 9 | 18 |
3 | 3000 x 2515 | 4 | 2 | 2480 | 9 | 18 |
3.3 | 3300 x 2515 | 4 | 2 | 2480 | 9 | 18 |
3.6 | 3600 x 2515 | 4 | 2 | 2480 | 10 | 20 |
4 | 4000 x 2515 | 4 | 2 | 2480 | 11 | 22 |
5 | 5000 x 2515 | 4 | 2 | 2480 | 12 | 24 |
Please note: Hole centres on fixing detail can be reduced from 304mm to 152mm
for additional security. Post section is determined by the height
of the fence.
358 Mesh Fence Heights
1.8 metres, 2.0 metres, 2.4 metres, 2.7 metres and 3.0 metres.
358 Mesh Fence size
75mm x 12.5mm produced with 4.00mm +/- 0.10mm wire.
358 Mesh Fence Panels
Manufactured using 4mm wire welded at each intersection creating a
strong and durable panel, the mesh aperture consists of a 76.2 x
12.7mm mesh spacing providing ultimate protection against climbing
and cut-through with excellent see through visibility!
358 Mesh Post system
Standard posts are manufactured from 60 x 60 up to 2.4m high,
rolled hollow section and include stepping provisions to suit
on-site conditions. All posts include bolt-through or threaded
inserts. Specially designed PROFIX Securing clamp system is used for quick and easy installation.
Extra length posts can be used to
increase the fence heights above standard heights.
Posts
60 x 60 x 3 RHS c/w clamp bar and M8 cup square bolts complete with
cone nuts through posts.
80 x 40 x 3 RHS c/w clamp bar and M8 cup square bolts complete with
cone nuts through posts.
80 x 80 x 3 RHS c/w clamp bar and M8 cup square bolts complete with
cone nuts through posts.
Applications
The SECUREGUARD-358 system is suitable for high security applications.
Gates
Standard gates are available or tailored-made to suit your
requirements. All gates are supplied with rear hung adjustable
hinges, pad-lockable drop-bolts, multi-holed to suit site
conditions complete with anti-climb PROTECTORGATE slide latch. See our gate range for further details.
Heavy duty fence panels ideal for enclosing high security and key
point installations
358 High Security Mesh Fence Features:
Intersections are electrically welded to form an integral and
impenetrable, non-collapsible barrier
Mesh aperatures are too small to allow cutting by conventional
methods
Fence cannot be scaled as mesh openings are too small to allow
footholds
Various coating options are available specially suited to specific
regional anti-corrosive requirements
358 High Security Mesh Fence Applications:
Military installations
Prisons
Power Stations
Sport stadiums
Mines
Refineries