Bright Surface Bimetallic Alloy Strip 1mmx5mm DIN TB20110 For Spring
Brand Name:OHMALLOY
Certification:SGS, ISO, RoHS
Place of Origin:China(Shanghai)
Surface:Bright
Density (g/cm3):7.7
Linear temperature (℃):-20~ 150
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room 311, No.1211, Mudanjiang Road, Baoshan district, Shanghai
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Bimetallic alloy strip 1mmx5mm DIN TB20110 for Spring
Bimetallic strip is used to convert a temperature change into mechanical displacement. The strip consists of two strips of different metals which expand at different rates as they are heated, usually steel and copper, or in some cases steel and brass. The strips are joined together throughout their length by riveting, brazing or welding. The different expansions force the flat strip to bend one way if heated, and in the opposite direction if cooled below its initial temperature. The metal with the higher coefficient of thermal expansion is on the outer side of the curve when the strip is heated and on the inner side when cooled
The sideways displacement of the strip is much larger than the small lengthways expansion in either of the two metals. This effect is used in a range of mechanical and electrical devices. In some applications the bimetal strip is used in the flat form. In others, it is wrapped into a coil for compactness. The greater length of the coiled version gives improved sensitivity.
Diagram of a bimetallic strip showing how the difference in thermal expansion in the two metals leads to a much larger sideways displacement of the strip
Composition
| Grade | 5J20110 |
| High expansion layer | Mn75Ni15Cu10 |
| Low expansion layer | Ni36 |
Chemical composition(%)
| Grade | C | Si | Mn | P | S | Ni | Cr | Cu | Fe |
| Ni36 | ≤0.05 | ≤0.3 | ≤0.6 | ≤0.02 | ≤0.02 | 35~37 | - | - | Bal. |
| Grade | C | Si | Mn | P | S | Ni | Cr | Cu | Fe |
| Mn75Ni15Cu10 | ≤0.05 | ≤0.5 | Bal. | ≤0.02 | ≤0.02 | 14~16 | - | 9~11 | ≤0.8 |
Typical Physical properties
| Density (g/cm3) | 7.7 |
| Electrical resistivity at 20℃(Ωmm2/m) | 1.13 ±5% |
| Thermal conductivity, λ/ W/(m*℃) | 6 |
| Elastic Modulus, E/ Gpa | 113~142 |
| Bending K / 10-6℃-1(20~135℃) | 20.8 |
| Temperature bending rate F/(20~130℃)10-6℃-1 | 39.0%±5% |
| Allowable temperature (℃) | -70~ 200 |
| Linear temperature (℃) | -20~ 150 |
Application: The material is mainly in automatic control devices and instrumentation (eg: exhaust thermometers, thermostats, voltage regulators, temperature relay, automatic protection switching, diaphragm meters, etc.) make temperature control, temperature compensation, current limit, temperature indicator and other heat-sensitive components.
Feature: The basiccharacteristics ofThermostat Bimetallicisbending
deformationwith temperature changes, resulting ina certainmoment.
Thermostat Bimetallic Stripexpansion coefficientisdifferentfrom
thetwo or more layersofmetaloralloyalongthe entire contact
surfacefirmlybonded, having atemperature-dependentshape
changeoccursthermosensitivefunctional composites. Wherein thehigher
expansioncoefficientofthe activelayer isa layercalled
alowcoefficient of expansionof thelayer is namedpassive layer.
Style of supply
| Alloys Name | Type | Dimension | |
| OhmAlloy-5J20110 | Strip | W= 5~120mm | T= 0.1mm |
Bright Surface Bimetallic Alloy Strip 1mmx5mm DIN TB20110 For Spring
Inquiry Cart
0