Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength
Brand Name:OHMALLOY
Certification:ISO
Model Number:Alloy C276
Minimum Order Quantity:15kg/spool
Delivery Time:7-20 DAYS
Payment Terms:L/C, T/T,
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room 311, No.1211, Mudanjiang Road, Baoshan district, Shanghai
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength
PRODUCT OVERVIEW
Alloy C-276 is a high purity nickel-chrome-moly-tungsten (Alloy C-276) wire specifically designed for arc spraying. It produces dense, well-bonded coatings with good resistance to corrosion, and stress cracking in caustic, acidic and chloride mediums. It’s high hardness makes it very resistant to abrasion and metal wear.
TYPICAL DEPOSIT CHARACTERISTICS:
Þ Typical Hardness: HRC 35
Þ Bond Strength: 7000 psi
Þ Deposit Rate: 10 lbs/hr/100A
Þ Deposit Efficiency 70%
Þ Wire Coverage: 0.8 oz/ft2 / mil
Þ Surface Texture * Variable
* Depends on air pressure used
SURFACE PREPARATION
Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
APPLICATION
Þ Corrosion resistance
Þ Pump casings
Þ valves
SPECIFICATION
Alloy C-276
NOMINAL CHEMICAL COMPOSITION (wt%)
| Ni | Cr | Mo | Fe | W |
| 60.0 | 15.0 | 16.0 | 5.0 | 4.0 |
RECOMMENDED SPRAY PARAMETERS:
| Diameter | Air Pressure | Voltage | Amperage | Standoff |
| 1/16” (1.6mm) | *50-60 psi | *29-32 | *100-300 | *3-8 in (8-20 cm) |
STANDARD SIZES & PACKAGING:
| Diameter | Packaging |
| 1/16” (1.6mm) | 15kg/spool |
Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength
Inquiry Cart
0