HENGYUAN- Henan Hengyuan Crane Machinery Group Co.,LTD (BV Certified Company)
About HYcrane
DG Crane - Ld Single Beam Overhead Travelling Crane
Products are sold toEurope, North America, South America, Middle East
We have a professional sales team,can privede u aquick and professional reply.
Exclusive engineer support at any time,so we can design within24 hours.
2 year warrantyfor whole machines, p
Low charge for continue maintenancewhen warranty is expired.
we can produce t
We can providefree trainingto end-users,d
Products are sold toEurope, North America, South America, Middle East
Brief introduction of Electric wire rope hoist
Safty features
1. Overload protection:If the material is over the capacity, the
hoist will give a sharp warning for protection itself.
2. Emergency brake:If the operation staff encounter some emergency
situation, we could start the emergency brake system to protection
the related treasure.
3. Control Method:Room control or remote control to avoid any
injure to the operation staff
Advantages
1. Low-vibration, quiet-running motor
2.Fast acting brake
3.Gearbox lubricated for life
4. Protective rope guide
5. Frequency inverter for stepless travel motions
Working condition
The product applies to such an environment as no fire, no explosive
danger, no corrosive media and no dirt exist. And the temperature
is between 20° C
below zero and 40° C up zero,
Painting
Primer and finishing paint
Color: according to your demand.
Average thickness: about 100 microns.
CD/MD Type for single girder cranes
This type hoist is light and small crane machinery.
CD1 type is general speed, it can satisfy the requirement of
general use.
MD1 type has two lifting speed- general speed and slow speed. When
working in slow speed, it can satisfy the requirement of precision
loading and unloading, examine and repair machine tool etc
precision work.
Therefore, the useful scope of MD1 is wider than CD1 type.
Low headroom for single girder cranes
This type of electric wire rope hoist is utilised where there is low headroom for single girder cranes
or monorails.
Its compact design and construction makes it ideal for low
buildings, where maximum hook height is required.
The low headroom hoist has a capacity of up to 12.5 tonne
Top running for double girder cranes
This electric wire rope hoist is utilised for top running on double girder cranes, with a
capacity of up to 40 tonne.
Technical parameters of Electric wire rope hoist
Capacity
T
1,2,3,5,10
16,20
Span
m
7.5-22.5
Lifting height
m
6,9,12,18,24,30
12,18,24,30
Operation method
Pendent line with push button/ remote control
Speed
Lifting
m/min
8,8/0.8,7/07
3.5,3.5/0.35
Cross travel
m/min
20,30
20,30
Long travel
m/min
20,30,45,60,75
Electric hoist
type
CD/MD
CD/MD/HC
Working duty
A3
A3
Power supply
AC
380V/50HZ/3P
380V/50HZ/3P
Safty features
1. Overload protection:If the material is over the capacity, the
hoist will give a sharp warning