interface converter Network bridge of E1 to ethernet protocol converter
Brand Name:Fibreasy
Certification:ISO2008
Model Number:FC-E1/100M
Minimum Order Quantity:1 pair
Delivery Time:5-15days
Payment Terms:L/C,T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 36 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
interface converter Network bridge of E1 to ethernet protocol converter
Product Overview
E1-4ETH interface converter is based on FPGA.The device provides the transition between ITU-T G.703 (E1) standard unframed E1 interface and 10/100Base-T interface. It is a high capability, self-adaptable long-distance Ethernet bridge.The product is small and with low cost. It is widely used in connecting between WAN and LAN, monitoring, etc
Features
- Can realize monitor and control of remote equipment, OAM management data did not take up users’ timeslot and save E1 bandwidth
- Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;
- Have indicator when the device is power-off or E1 line is broken or lose signal;
- Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
- The Ethernet interface supports jumbo frames (1916 Bytes);
- 4Channel 10M/100M Ethernet interface can isolate each other to realize communication independently;
- Ethernet interface supports10M/100M, half/full duplex auto-Negotiation and AUTO-MDIX (crossed line and straightly connected line self-adaptable );
- Provide 2 clock types: E1 master clock and E1 line clock;
- Have three Loop Back Mode: E1 interface Loop Back (ANA),Ethernet interface Loop Back(DIG),Command the remote Ethernet interface Loop Back(REM)
- Have pseudo random code test function, easy the installation and maintenance;
- Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
- Have Ethernet monitor self-reset function, the equipment will not dead
- Ethernet interface supports the counters of receiving and transmitting frame, receives wrong frame counters. E1 interface supports the counters of receiving wrong frame;
- Realize monitor of remote equipment temperature and voltage from local equipment;
- Support SNMP Network Management;
- Can form the structure: Ethernet E1 Bridge(A)－－-E1 Optical Fiber Modem(B)－－-Ethernet Optical Fiber Modem (C)
Technical parameters
| E1 Interface | Interface Standard: comply with protocol G.703; E1 Impedance: 75Ω (unbalance), 120Ω (balance); Jitter tolerance: In accord with protocol G.742 and G.823 Allowed Attenuation: 0~6dBm |
| Ethernet interface (10/100M) | Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096 Connector: RJ45, support Auto-MDIX |
| Power | Power supply: AC180V ~ 260V；DC –48V；DC +24V Power consumption: ≤3W |
| Dimension & Weight | Product size: 216 X140 X31mm( WXDXH) Simple packaging: 274 X193 X84mm(WXDXH) Piece weight: 1.2KG |
| Working environment | Working temperature: -10°C ~ 50°C Storage temperature: -40°C ~ 80°C |
Networking Application
interface converter Network bridge of E1 to ethernet protocol converter
Inquiry Cart
0