

Add to Cart
42kg CO2 Fire Extinguisher for Fire Detected Tube Extinguisher
Description:
This device can detect fire situation by a pressurized fire trace
tube, which connecting to an extinguishing agent storage. Both
HFC-227ea/FM200 or Carbon Dioxide can be used as extinguishing
agent for this device.
Usually, it would be designed to two modes of discharge----direct
release and indirect release. When fire breaks out, the fire trace
will activate the device, and spray extinguishing agent through the
fire trace tube itself, we call it direct release. And another
mode, the fire trace tube will detect fire, and extinguishing agent
is discharge through a pre-installed pipe and nozzle quickly, we
call it indirect release.
Fire trace extinguishing device is a good device with covering the
shortage of fixed device. Because it can be used in a small space
or area of special environment which cannot install pipeline,
nozzles, or fire alarm system.
Parameter:
NO. | Type of Device | Direct Type Fire Detecting Tube CO2 Fire Suppression Device | Indirect Type Fire Detecting Tube CO2 Fire Suppression Device | Direct Type Fire Detecting Tube FM200 Fire Suppression Device |
1 | Device model | WZ-Q/T-EZ6-XJ60 | WZ-Q/T-EJ42-XJ60 | WZ-Q/T-QZ3-XJ60 |
2 | Storage Pressure (20℃) | 5.17Mpa | 5.17Mpa | 2.5Mpa |
3 | Max. Working Pressure | 12.1Mpa | 12.1Mpa | 4.2Mpa |
4 | Min. Agent Needed for A Unit | 2.5kg/m³ | 1.5kg/m³ | 0.7kg/m³ |
5 | Max Agent Capacity | 6kg | 42kg | 3kg |
6 | Max. Length of Fire Tube | 25m | 25m | 20m |
7 | Max. Length of Release Tube | -- | 12m | -- |
8 | Max. Filling Rate | 0.6kg/L | 0.6kg/L | 1.12kg/L |
9 | Working temperature | 0℃~49℃ | 0℃~49℃ | 0℃~50℃ |
Components:
This extinguishing device needs no electrical elements and pipe
fittings to consist of a system. It can be a fire suppression
system itself.
The direct type fire detecting tube fire suppression system is
consist of a cylinder, an at most 25m long fire detecting tube, a
container valve and two kinds of agents-- co2 and fm200.
The indirect type fire detecting tube fire suppression system has
the same components as the direct type except a release tube added.
In this system, the fire detecting tube is used for just detecting
function, so it needs a release tube together, however, for the
direct type, the fire detecting tube can be used for both detecting
and releasing.
Advantages:
The fire detecting tube fire suppression device has the following
advantages:
1. Convenient installation and transportation. Because this system
combines fire fighting and alarm function together, and no needs to
match electrical elements and pipe fittings, so after fixing the
cylinder on a place, all left to do is fixing the detecting tube
around a potential source of fire.
2. Non-electric start mode. It doesn’t need the power to activate
the system. This system’s work principle is using its own storage
pressure instead of relying on the outside force activating. When
the detecting tube is broken by the fire, the agent will discharge.
3. Little occupation of space. This system is suitable for
protecting a system, like telecommunication system, rather than a
protected zone. The cylinder fixes on the outer cabinet, and will
not occupy many places.
Certificate
Environmental Management System Certificate
Occupational Health and Safety Management System Certificate
Quality Management System Certificate
Certificate of China Compulsory Product Certification
Packages
We always pack it with polyfoam first and then put it into a wooden
case. Sometimes, in order to meet with customers or the safety
requirement, we will make a pallet for the goods.
Company Introduction:
Guangzhou Xingjin Fire Equipment Co., Ltd., which is situated in
Guangzhou, which is a key hub for communication between China and
the rest of the globe, is surrounded by easy access to transit and
a stunning natural environment. We are a manufacturer, and our
professional and experienced staff, which includes the program
design team, the skillful installation team, the quality detecting
team, and the after-sell service team, devotes its time to the
study and development of HFC-227ea (FM200) products. The pipe
network FM200 fire suppression system, the cabinet type FM200 fire
suppression system, the automatic FM200 fire extinguisher (ceiling
mounted style), the fire detecting tube suppression system, and the
automatic fire suppression tube are currently among the most
commonly utilized of our well-known FM200 products. As a result of
high-quality products and services as well as the good reputation,
our company is well-received by the customers in China.
Part Cases Show:
• In Sichuan province, the project cases are Bei Xin Run Yuan, Dong
Lu Yi Jing, Yuewang Tower, Times Flower City, Shude Middle School,
Wal - Mart near ASCB, New Hope Building, Xin Yi Zi Jin City,
Tobacco Building, etc.
• In Guangdong province, the project cases are GAC Group, 10086 in
Shenzhen, Haizhu Industrial and Commercial Bureau, Wanbao Air
Controller, Yingfu Building in Shenzhen, Bank of Communication in
Zhanjiang, Lijin Square in Zhanjiang, Zhanjiang Broadcasting and TV
Station, etc.
• In Shandong province, the project cases are Lushang Office
Building, Lushang Marketing Center, etc.
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all
products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove
all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a trading company or a manufacturing, first?
A1: We are a producer.
Q2: Do OEM items exist?
A2: Your own artwork and design are appreciated.
Q3: Where is your factory located? Can I go there?
A3: Shilou, Panyu, Guangzhou, Guangdong, China is where our factory
is located. Yes, of course. We always look forward to seeing you.
Q4: How can I get to your plant ?
A4: You can take a taxi or take the subway to get here because of
how easily it can be reached. If arriving by subway, you must take
the line 4 and alight at the Shiqi station. Take the No. 126 bus
out of the station after that, and get off at Yuexi station.