Manually Or Automatic Selector Valve Fire Protection Valves 8Mpa Reasonable Good Price High Quality

Manually Or Automatic Selector Valve Fire Protection Valves 8Mpa

Selector Valve

Description:

One side is connected with manifold one side is connected with pipe network. It is closed normally, it can be opened in manually or in automatic. When a protection area is on fire alarm, the driving device discharge nitrogen gas opens its corresponding selector valve and container valve to release the extinguishing agent.

Manually or Automatic Selector Valve Fire Protection Valves are specialized valves that are designed to control the flow of water or other fire-retardant liquids in fire protection systems. These valves play a critical role in the proper functioning of a fire protection system, as they allow firefighters to isolate specific areas that need to be protected and direct the flow of water or other fire-suppression agents.

Manually Selector Valve Fire Protection Valves feature a manual lever or knob that allows the user to select which area of the building to protect. These valves are typically installed outside of the protected area and are easily accessible to firefighters in the event of a fire. When activated, the valve diverts water flow to the designated area.

Automatic Selector Valve Fire Protection Valves, on the other hand, do not require manual activation. These valves are equipped with sensors or automatic detection systems that can detect the location of the fire and automatically divert water flow to the affected area. The intelligent system of these valves enables fast and reliable reaction in case of a fire, minimizing the chances of loss of property and life.

Both types of valves are critical components of a fire protection system and are designed to work in tandem with other components, such as fire alarms and sprinkler heads. Automatic Selector Valve Fire Protection Valves provide a convenient and reliable way to protect the building, even in the absence of personnel. Manual Selector Valve Fire Protection Valves are preferred in smaller buildings or where automatic systems are impractical.

Use and maintenance:

You should check the press arm of the valve, it must be compacted, it can not be loosed or jammed. When you open the valve in manually, you need pull the turning arm and the pressure arm together. After this action, the valve must be reset in manually, otherwise it can not be used again.

Company Introduction

Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.

Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the line four and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.

GUANGZHOU XINGJIN FIRE EQUIPMENT CO., LTD. is a professional manufacturer of making and installing fm200 fire suppression system and other fire fighting equipments.

Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200), Novec1230, CO2 & Inert gas productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular FM200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. Besides, our inert gas fire suppression systems are also more and more popular, such as IG541(inergen) fire suppression system, IG100(nitrogen) fire suppression system, IG55(argon) fire suppression system. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in around the world.

LOCATION:

Guangzhou xingjin fire equipment co., ltd. has a subsidiary called Guangzhou Xing You Rong Trade Co.,Ltd. This two companies locate in different places. Guangzhou xingjin fire equipment co., ltd. set himself at Shilou town, Panyu district, Guangzhou, and its subsidiary locates at Room 703&704, N0.2 Building, NO.8 Lianyun Erheng Road, Shiqi Town, Panyu District, Guangzhou, China.

Factory Overview:

The company's office and factory are not seperated. These two contain in the same buiding and the first floor is for factory use, the second floor for office use. We here has estabilished a professional project design team and an excellent install and after-sale service team. Our good service and best quality have won a lot of good feedbacks from customers, but we still keep improving our technique trying to innovate more new fire fighting products.

Honors:

Since established in 2010, the company has won a lot of praise and honors. The title "AA level credit company" was given to us by China Fire Protection Association in 2014. Besides, all our products pass the CCC test that means the quality has been regconized.

Products:

The main products of our company is the fm200 series, at the same time we also sale other fire fighting equipment, such as the anti-poison respirator, fire resistance rolling shutter and so on.

The fm200 fire suppression series have been divided into three big types. They are pipe network type fm200 fire suppression system, carbinet type fm200 fire suppression system, hanging type fm200 fire suppression system. This kind of products have widely regconized as the best substitute to the halon series.

Main Markets:

Our target customers are those people who require fire fighting equipments all over the world. So far, we have rapidly developed markets in Southeast Asia, the Middle East and Africa. In the following years, we will strive for other foreign markets.

We are ready for challenges, so please do not hesitate to send an inquiry to us!