2 Types Charmhigh 4 Heads Feeder Pick And Place Machine CHMT530P4 + CHMT560P4

This two models desktop pick and place machine needs to work with Yamaha feeders.

It has 4 heads with 30 or 60pcs feeder slots, for small smt production is your good helper!
The operation system is industry level embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer.
CHMT560P4 using 502---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, LED, SOT, SOP, QFN, BGA, Diode, Transistor...etc, which can meet more customers' demand. Very good for small batch production or prototyping or education.

Youtube working video:

4 heads pick and place machine - Charmhigh CHMT530P4:
www.youtube.com/watch?v=2W3rWfMzPo

Advantages:

1. Convenient software, Embedded Linux System of the machine, stable industry main board, independent operation, no need external computer, operation easier and more convenient, learn fast.
2. In-build touch screen, no need external monitor, room saved, more convenient operation, USB mouse supported as well.
3. Top and bottom two vision cameras, correct the position of each components, you can view the vision image from screen for every components.(max component size 22*22mm)
4. It has flexible PCB clamping fixture, suitable for different size of PCB.
5. It supported custom IC tray, IC tray can be fixed on machine table. Software max allow 20pcs tray.
6. Four mounting heads with 4pcs Juki Nozzles, Juki nozzle inside magnet, so it can be removed by finger, no need to disassemble with wrench, nozzles rotation angle -180 degree to +180 degree.
7. Work with Yamaha standard pneumatic feeders(8mm/12mm/16mm/24mm/vibration feeder) and Electronic feeders(8mm/12mm/16mm).
8. Z axis detection, placement heads can auto back to origin to prevent nozzles break.

9. Max height component support 10mm.
10. Closed-loop control, X,Y Axis with encoder, not out of step.
11. PCB calibrated by two components position, then rest components will be calibrated automatically.
12. Auto calibrate mark 2 points, it will be auto calibration before every running, make sure every PCB mounting precisely.
13. With vacuum detection, with automatic feeding, if one component suck crooked, it will automatically throw it to deposit area, then pick a new one to mount again.
14. With vision detection, camera will auto correction component angle and place on PCB board right place. If heads not picking up components, camera will detect it and go back to pick again, 3 times not picking, machine will alarm and stop, after supply material, then continue working, no need to start over again.

15. Comes with convert tool (PC version), edit work file in computer and load work file into machine by USB port, quick and convenient.
16. Support panelized boards.
17. If you don't have PCB file, you can create a new work file to program in machine directly.

18. Support single step.

19. Support cut tapes/ bulk material/ tube material.

This is CHMT530P4, which has one side feeder slot (30pcs slots):

This is CHMT560P4, which has double side feeder slots (front 30+back 30 = total 60pcs slots):

Working with Yamaha universal feeders:

Option:

1. 8mm electric feeder

2. 8*4mm, 12mm, 16mm, 24mm pneumatic feeder

3. vibration feeder.

4 Placement heads, can install different kinds of Juki nozzle (503,504,505,506), place different kinds of components:

With double vision cameras, placement very accurate:

Juki Nozzles, very easy opearation, magnet inside, no need to use wrench to pull down

PCB Clamping area:

IC tray supported, cut-tape also supported:

It can install Yamah vibration feeder as well (for tube material):

Please note:

The pick and place machine is complete set with all accessories included in the package, machine ready to use!

The only thing you need to prepare is an external air compressor with 8mm outer diameter pipe (supplying air for pneumatic feeders), inserting the pipe on the backside of machine.
Please purchase this machine with confidence.