Add to Cart
Radar Antenna Micro Slip Ring Capsule 300rpm 8 Circuits 2A With
Flange Professional solution
Description
The LPC-08A capsule slip ring is a standard, off-the-shelf unit
that uses gold contacts at the rotary interface. Color-coded lead
wires are used on both the stator and rotor for simplifying
electrical connection. It provides smoother running, lower torque
and lower electrical noise than competitive slip rings.
The slip ring is made of brushes, conductive rings, insulation
materials, binding materials, a supporting frame, precision
bearings and housing etc. The brushes which are made of precious
metal are in two-point contact to the ring.The LPC-08A used in any
electromechanical system that requires unrestrained, continuous
rotation while transmitting power and /or data from a stationary to
a rotating structure.
Outline Drawing
Electronic & Electric | Mechanical | |||
Circuits | Total | 8 CKT | Working Speed | 0~300rpm |
Detail | 8x2A | Contact Material | Gold to Gold | |
Rating Voltage | 0~240V AC/DC | Housing Material | Engineering plastics | |
Dielectric Strength | ≥500VAC@50Hz(P) ≥100VAC@50Hz(S) | Lead Wire Length | Stator:250±5mm Rotor:250±5mm | |
Insulation Resistance | ≥100MΩ@500VDC(P) ≥10MΩ@100VDC(S) | Dynamic Resistance Fluctuation Value | ≤35mΩ | |
Environment | Remarks | |||
Working Temperature | -20°C~+60°C | Application | / | |
Working Humidity | ≤60%RH | Other | / | |
IP | IP40 | Note: "P" stands for power, "S" stands for signal. |
Application picture