Gasoline fuel injector launch cnc602a injector cleaner and tester

Important notice: Because liquid can not ship by airmail, our CNC-602A do not contain Injector test liquid and Injector detergent, you can purchase it from your local market. Please kindly forgive. Liquid picture is for display.

1.Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.

2.Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the

help of backlight. This test is also for reverse flush.
3.Leakage test: To test the sealing and dribbling conditions of injectors

under system pressure.
4.Injecting flow test: To check the injecting amount of the injector in 15

seconds of constant injection.

5.Auto. test: To test injectors by simulating different working conditions.
On-6.vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Power supply: AC220V±10%, 50/60Hz;

Ultrasonic cleaner power: 100W;
Input power: 250W;
Simulated RPM range: 10~9990rpm; step: 10rpm;
Time range: 1~9999s;
Pulse width: 0.5~25ms; step 0.1 ms;
Fuel tank capacity: 4700ml;

CNC-602A Spare Parts

No. PartCode PartName
1 105020217 CNC pulse signal connection cable 1,T=0.5
2 105020218 CNC pulse signal connection cable 2,T=0.8
3 103260037 Ultrasonic cleaner assembly 100W
4 106030038 On-vehicle adaptor package(tool kits)
5 107010428 CNC-602A user manual(En&Ch)
6 103250013 Top-supply connector 1
7 103250015 Swiss thread adaptor for fuel top-supply injector
8 103250016 Coarse thread adaptor for fuel top-supply injector
9 103250018 CNC-601/801 Hexangular stopper
10 104990012 CNC-801 BUICK injector adaptor

>>> Packaging : Standard export package

>>> Delivery: within 10 days after receiving the deposit