Product Details
Dual Tank Cold And Heat With Light Juice Machine With CE
Konmax Cold Drink Dispenser Specification:
Model | LRSPD-18L×2 |
Voltage | 220-240V/110-115V |
Frequency | 50/60/HZ |
Cold poqer | 320W |
Heat poqer | 1500W |
Cold-beverage temperture | 7C-12C |
Hot-beverage temprture | 52C-58C |
Shape size | 510×470×740 |
Carton Packing | 530×490×760 |
Weight | 40 |
Gross weight | 42 |
Konmax Cold Drink Dispenser Detailed Photo:
Konmax Cold Drink Dispenser Packing Photo:
Konmax Cold Drink Dispenser Installing Methods and Notices
1.To install it , please choose tyhe site which is flat ,flexbile
and can avoid the direct sunshine in summer .
2.Around the machine should have 150 mm up room to make the air
circulating and make sure the machine can run effectively .
3.Before installing it please check the supply power whether it
confirms to the requirements or not , The power supply cable is not
too thin ot too long .The cross section of cable should be
1.5-2.5mm ,voltage is mouted on the fixed position with fuse which
keep the users safety it must have the reliable grounding ,
The socket should be mouted on the fixed position with fuse which
will keep the machine running safety .
4.To make the fix position for machine should make its fron lower
and back higter (to adjust the foot of the
bottom can do it ),then the water in salver can flow into the box
through the hose .
How to use the cold beverage machine?
1.To fall prepared beverage into the crock , the height of it is
should not exceed the standard height (9L-12L-18L-20L-50L),
otherwise the beverage will flow into the churn-dasher from the
dasher tube,which will make the dasher burn .
2.The temperature of the beverage should not too high (not exceed
35), otherwise it will make bad effection for the refrigeration .
3.Plug in the supply power to the 3 hole socket , the grounding
hold should connect with the protecable wire or fixture to ensure
the safety .
4.To turn the switch on the position of refrigeration , press down
the refrigeration switch , the compressor fan starts running and
refrigeration system starts working .
Then start the dasher to mix or start the spewing swtich to spew.
5.When the beverage becomes to the suitable temperature , please
make the cup against the push board lightly .the beverage will flow
into the outlet mouth .
6.when the temperture reduces to the certain degree , the
refrigeration will stop running because of the influence from the
temperaturecotroller .And when it increases, it will start
automatically again .
7.It should re-start after 5 minuters if it turn off suddenly or
stop temporarily .otherwise it will damage the compressor .
Company Profile
China Kingmax Industrial co., Ltd(Kingmax is our HK company name ,
we also have inland company Jiangsu Konmax Import and Export
Co.,Ltd , HK company is our head office mainly in charge of selling
and Konmax is specially developing,designig, manufacturing etc). is
a professional manufacturer, integrating production and sales of
freshly squeezed juice machines,slush machine ,cold drink dispenser
etc beverage machine .We have independent intellectual property
rights, product quality control(through CE certification and ETL
test ) for delivery of guaranteed products around the world.
Jiangsu Konmax Import and Export Co.,ltd commits in developing
,designing , manufacturing , selling beverage machine including
centrifugal juicer machine , juicer dispenser etc With 10 QC ,6
engineer,150 workers ,3 production lines 15,000 square meters
production area c .We can provide you with our independently
designed and offer OEM and ODM for your specified requirements.
With many years of production experience, our company absorbs and
introduces a variety of advanced technologies and excellent
processing and testing equipment, and strictly implements ISO
quality certification standards CE certificate and good after-sales
service systems. We have won the trust of many customers and our
products are exported to Europe market ,Russia, India, Ukraine,
Nepal, South Africa, Indonesia and other countries and regions.You
are always welcome to visit our website or our factory. We are more
than happy to show you our technologies and capacity.
If you are a new customer, you will enjoy doing the first business
with us. If we have made business, you will be our most respective
distributors forever.